Investigating the Detachment of Glazed Ceramic Tiles Used in Buildings: A Brazilian Case Study
Open Access
Abstract
Ceramic detachments in cladding systems are indicative of adhesion loss between the ceramic tiles and the substrate or its adhesive mortar due to inadequate quality workmanship, the quality of the adhesive mortar or that of the ceramic material, whether acting simultaneously or not. The shear stresses resulting from the ceramic tiles’ expansion due to humidity accelerate this process. There is a shortage of studies on the quality of ceramic tiles and adhesive mortars. This study conducted elemental, physical and microstructural characterization tests on ceramic tiles and adhesive mortars that showed detachment up to two years after being laid. At first glance, the adhesive mortar samples had adequate traits and degree of hydration. The ceramic tiles, on the other hand, showed high porosity and high levels of amorphous and poorly sintered materials, with no crystalline phase. In a second analysis, scanning electron microscopy (SEM) tests associated with boiling plus autoclave moisture expansion tests executed on unused ceramic pieces of the same conformation proved to be more suitable for predicting expansion potential than standard tests. Due to the costs and difficulties in accessing and analyzing the SEM tests, chemical analysis of the ceramic tiles was executed using X-ray fluorescence (XRF) to assess the presence of the amorphous silica (free quartz) and alkaline oxides. Together with pressure and temperature determination tests (autoclave), they may represent another alternative that is easier to access and more cost-effective for predicting future expansion.Keywords
Funding Information
- Renato Freua Sahade (10404329/2022, 003/2025)
- Mackenzie Presbyterian University (10404329/2022, 003/2025)
This publication has 23 references indexed in Scilit:
- Investigation of CaO/MgO on the formation of Anorthite, Diopside, Wollastonite and Gehlenite phases in the fabrication of fast firing ceramic tilesConstruction and Building Materials, 2023
- Failure patterns associated with facade zones and anomalies in the initiation and propagation of degradationConstruction and Building Materials, 2022
- Moisture expansion of Ca-rich ceramic bodyIOP Conference Series: Materials Science and Engineering, 2021
- Effect of fluxing raw materials on moisture expansion of monoporosa wall tile bodiesJournal of Thermal Analysis and Calorimetry, 2020
- Stochastic maintenance models for ceramic claddingsStructure and Infrastructure Engineering, 2019
- Influence of Substrate Characteristics on Behavior of Applied MortarJournal of Materials in Civil Engineering, 2018
- Moisture induced length changes of tile adhesive mortars and their impact on adhesion strengthConstruction and Building Materials, 2012
- Factors affecting ceramic tile adhesion for external claddingConstruction and Building Materials, 1999
- Moisture Expansion of a Ceramic Body and its Internal Surface AreaNature, 1962
- Moisture Expansion Relationships for a Fired Kaolinite-Hydrous Mica-Quartz ClayNature, 1961