Longitudinal Guided Wave Inspection of Small-Diameter Elbowed Steel Tubes with a Novel Squirrel-Cage Magnetostrictive Sensor
Authors:
Open Access
- 12 November 2019
- journal article
- research article
- Published by Wiley in Journal of Sensors
- Vol. 2019, 1-9
Abstract
In the study, ultrasonic longitudinal mode guided waves were employed to detect defects in elbowed tubes (without welds) with a diameter of 10 mm. Finite element simulation results highlighted that the emitted L(0,1) mode guided waves experienced strong reflection and mode conversion at the elbow region to generate F(1,1) mode, followed by slow and weak F(2,1) mode. The guided wave reflected from the elbow with a through-wall defect was manifested as two overlapped wave packets, which were good indicators of a defective elbow. To conduct L(0,1) mode guided waves inspection on the small-diameter elbowed tubes, a novel tailored squirrel-cage magnetostrictive sensor was employed in the experiment. The new sensor employed the configuration of segmental iron-cobalt strips and small-size permanent magnet arrays. The entire sensor is composed of two identical C-shaped sensor elements and can be recycled and installed conveniently. Experimental results obtained from healthy and defective tubes were consistent with the conclusions obtained from finite element simulations. An artificial through-wall defect at the elbow and a notch defect at the straight part of the tube could be simultaneously detected by L(0,1) mode guided waves through comparing experimental signals with simulation results.Keywords
Funding Information
- Beijing University of Technology (2018A07, 11572011)
- National Natural Science Foundation of China (2018A07, 11572011)
This publication has 21 references indexed in Scilit:
- Development of a high sensitive magnetic flux leakage instrument for imaging of localised flaws in small diameter ferromagnetic steel tubesIET Science, Measurement & Technology, 2018
- Development of magnetic flux leakage measuring system for detection of defect in small diameter steam generator tubeMeasurement, 2017
- A new multichannel time reversal focusing method for circumferential Lamb waves and its applications for defect detection in thick-walled pipe with large-diameterUltrasonics, 2014
- The application and research of high-frequency ultrasonic reflection technique used in the measurement of small diameter’s tube cavity sizeMeasurement, 2013
- Torsional guided wave attenuation in piping from coating, temperature, and large-area corrosionNDT & E International, 2012
- Application of SOM Network in Ship Pipeline Leakage DetectingAdvanced Materials Research, 2012
- Material property estimation for tubes and arteries using ultrasound radiation force and analysis of propagating modesThe Journal of the Acoustical Society of America, 2011
- The application of synthetic focusing for imaging crack-like defects in pipelines using guided wavesIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2009
- Influence of sodium deposits in steam generator tubes on remote field eddy current signalsInternational Journal of Pressure Vessels and Piping, 2008
- Small Diameter Remote Field Eddy Current Inspection for Unpiggable PipelinesJournal of Pressure Vessel Technology, 2005