Engineering Breakdown Probability Profile for PDP and DCR Optimization in a SPAD Fabricated in a Standard 55 nm BCD Process
Open Access
- 21 September 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 28 (2: Optical) , 1-10
Abstract
CMOS single-photon avalanche diodes (SPADs) have broken into the mainstream by enabling the adoption of imaging, timing, and security technologies in a variety of applications within the consumer, medical and industrial domains. The continued scaling of technology nodes creates many benefits but also obstacles for SPAD-based systems. Maintaining and/or improving upon the high-sensitivity, low-noise, and timing performance of demonstrated SPADs in custom technologies or well-established CMOS image sensor processes remains a challenge. In this paper, we present SPADs based on DPW/BNW junctions in a standard Bipolar-CMOS-DMOS (BCD) technology with results comparable to the state-of-the-art in terms of sensitivity and noise in a deep sub-micron process. Technology CAD (TCAD) simulations demonstrate the improved PDP with the simple addition of a single existing implant, which allows for an engineered performance without modifications to the process. The result is an 8.8 $\mu$ m diameter SPAD exhibiting $\sim$ 2.6 cps/ $\mu$ m $^2$ DCR at 20 $^{\circ}$ C with 7 V excess bias. The improved structure obtains a PDP of 62% and $\sim$ 4.2% at 530 nm and 940 nm, respectively. Afterpulsing probability is $\sim$ 0.97% and the timing response is 52 ps FWHM when measured with integrated passive quench/active recharge circuitry at 3 V excess bias.Keywords
Funding Information
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (200021-169465)
- Qrypt Inc
This publication has 47 references indexed in Scilit:
- CMOS SPAD Based on Photo-Carrier Diffusion Achieving PDP >40% From 440 to 580 nm at 4 V Excess BiasIEEE Photonics Technology Letters, 2015
- CMOS SPADs: Design Issues and Research Challenges for Detectors, Circuits, and ArraysIEEE Journal of Selected Topics in Quantum Electronics, 2014
- Characterization and Modeling of Breakdown Probability in Sub-Micrometer CMOS SPADsIEEE Journal of Selected Topics in Quantum Electronics, 2014
- A Substrate Isolated CMOS SPAD Enabling Wide Spectral Response and Low Electrical CrosstalkIEEE Journal of Selected Topics in Quantum Electronics, 2014
- CMOS SPADs with up to 500 μm diameter and 55% detection efficiency at 420 nmJournal of Modern Optics, 2014
- A Geiger mode APD fabricated in standard 65nm CMOS technology2013
- A physically based model for evaluating the photon detection efficiency and the temporal response of SPAD detectorsJournal of Modern Optics, 2011
- A new look at impact ionization-Part I: A theory of gain, noise, breakdown probability, and frequency responseIEEE Transactions on Electron Devices, 1999
- Physics and numerical simulation of single photon avalanche diodesIEEE Transactions on Electron Devices, 1997
- An improved approach to the Shockley–Read–Hall recombination in inhomogeneous fields of space-charge regionsJournal of Applied Physics, 1992