Drying Shrinkage Behavior and Micro-Mechanism of Concrete Based on a Thermodynamic Fractal Model
Open Access
Abstract
This research systematically evaluated the durability performance of low-carbon cement concrete prepared with industrial solid wastes under harsh service conditions. Measurements included mechanical properties and drying shrinkage. Microstructural characterization was carried out using SEM-EDS, MIP, and TG-DTG, revealing a synergistic relationship between microstructural changes and the resulting mechanical and durability behavior of the concrete. The experimental results indicated that adding 25% fly ash (FA) lowered the compressive strength of the CF-25 and BF-25 concrete by 11.30% and 11.39%, respectively, while reducing drying shrinkage by roughly 9.2–9.5%. In comparison, incorporating 5% silica fume (SF) had contrasting effects. It significantly improved the compressive strength of the CS-5 and BS-5 concrete by 18.92% and 9.94%, respectively, but at the cost of increasing drying shrinkage by 6.30% and 18.68%, respectively. Fractal dimension analysis based on thermodynamic relationships showed that the pore structure fractal dimension (Ds) ranged from 2.88 to 2.93. Group C exhibited a higher Ds (2.93) than Group B (2.90), indicating a more intricate pore network associated with greater C-S-H gel formation. With FA addition, Ds decreased to 2.91601 for CF-25 but rose to 2.93244 for BF-25. With SF addition, Ds fell to 2.91182 for CS-5 and 2.88102 for BS-5. Micro-mechanistic analysis revealed that the limited pozzolanic activity of FA at early ages resulted in insufficient hydration products and increased porosity. In contrast, SF contributed to a dense, highly polymerized gel structure and an optimized pore size distribution through its strong pozzolanic reactivity and nano-filling action. The distinct chemical properties of high-calcium and low-calcium cementitious systems further accentuated the differential influences of these supplementary cementitious materials.Keywords
Funding Information
- National Key Research and Development Program of China (2024YFB3714804)
- National Natural Science Foundation of China (52478133)
- National Natural Science Foundation of China (52308143)
- Chongqing Talents (CSTB2024YCJH-KYXM0125)
This publication has 27 references indexed in Scilit:
- Residual mechanical properties of Q1200 ultra-high strength steel after different elevated temperatures and cooling methodsConstruction and Building Materials, 2026
- Engineering properties of municipal solid waste incineration fly ash-based thermally cured ultra-high-performance green cement compositesCeramics International, 2025
- Effects of fly ash and silica fume on abrasion resistance of high-ferrite Portland cement: A comparative studyConstruction and Building Materials, 2025
- Effects of curing temperature and supplementary cementitious materials on the interfacial transition zone (ITZ) of high-ferrite cement productsConstruction and Building Materials, 2024
- An overview of mechanical, permeability, and thermal properties of silica fume concrete using bibliographic survey and building information modellingConstruction and Building Materials, 2023
- Performance of recycled aggregate concrete with supplementary cementitious materials (fly ash, GBFS, silica fume, and metakaolin): Mechanical properties, pore structure, and water absorptionConstruction and Building Materials, 2023
- Compressive strength, water and chloride transport properties of early CO2-cured Portland cement-fly ash-slag ternary mortarsCement and Concrete Composites, 2022
- Effect of dispersibility of carbon nanotubes by silica fume on material properties of cement mortars: Hydration, pore structure, mechanical properties, self-desiccation, and autogenous shrinkageConstruction and Building Materials, 2020
- Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industryCement and Concrete Research, 2018
- Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymerJournal of Materials Science, 2010