Employing Synergetic Effect of Doping and Thin Film Coating to Boost the Performance of Lithium-Ion Battery Cathode Particles
Open Access
- 4 May 2016
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 6 (1) , 25293
Abstract
Atomic layer deposition (ALD) has evolved as an important technique to coat conformal protective thin films on cathode and anode particles of lithium ion batteries to enhance their electrochemical performance. Coating a conformal, conductive and optimal ultrathin film on cathode particles has significantly increased the capacity retention and cycle life as demonstrated in our previous work. In this work, we have unearthed the synergetic effect of electrochemically active iron oxide films coating and partial doping of iron on LiMn1.5Ni0.5O4 (LMNO) particles. The ionic Fe penetrates into the lattice structure of LMNO during the ALD process. After the structural defects were saturated, the iron started participating in formation of ultrathin oxide films on LMNO particle surface. Owing to the conductive nature of iron oxide films, with an optimal film thickness of ~0.6 nm, the initial capacity improved by ~25% at room temperature and by ~26% at an elevated temperature of 55 °C at a 1C cycling rate. The synergy of doping of LMNO with iron combined with the conductive and protective nature of the optimal iron oxide film led to a high capacity retention (~93% at room temperature and ~91% at 55 °C) even after 1,000 cycles at a 1C cycling rate.Keywords
This publication has 37 references indexed in Scilit:
- Improvement of cycling stability of LiMn2O4 cathode by Fe2O3 surface modification for Li-ion batteryIonics, 2013
- Fe‐Doped MnxOy with Hierarchical Porosity as a High‐Performance Lithium‐ion Battery AnodeAdvanced Materials, 2013
- Role of Cation Ordering and Surface Segregation in High-Voltage Spinel LiMn1.5Ni0.5–xMxO4 (M = Cr, Fe, and Ga) Cathodes for Lithium-Ion BatteriesChemistry of Materials, 2012
- Atomic layer deposition for nanostructured Li-ion batteriesJournal of Vacuum Science & Technology A, 2011
- Understanding the Improved Electrochemical Performances of Fe-Substituted 5 V Spinel Cathode LiMn1.5Ni0.5O4The Journal of Physical Chemistry C, 2009
- Atomic layer deposition of iron(III) oxide on zirconia nanoparticles in a fluidized bed reactor using ferrocene and oxygenThin Solid Films, 2009
- Improved electrochemical properties of a coin cell using LiMn1.5Ni0.5O4 as cathode in the 5V rangeJournal of Power Sources, 2006
- The cathode–electrolyte interface in the Li-ion batteryElectrochimica Acta, 2004
- Understanding the voltage profile of Li insertion into LiNi0.5−yFeyMn1.5O4 in Li cellsElectrochimica Acta, 2004
- Preparation and electrochemical investigation of LiMn2 − xMexO4 (Me: Ni, Fe, and x = 0.5, 1) cathode materials for secondary lithium batteriesJournal of Power Sources, 1997