Laser damage of crazed electron-beam high-reflectors following infrared and ultraviolet irradiation in the nanosecond pulse regime
- 25 August 2025
- journal article
- Published by Optica Publishing Group in Applied Optics
- Vol. 64 (25) , 7457-7464
Abstract
Laser damage of optical components can be a limiting factor in scaling the energetics of high-peak and average power laser systems. Specifically for optical coatings, damage under nanosecond pulsed irradiation is initiated by pre-existing defects in the coating layers, including those that cause discontinuities in the structure, like craze lines. Crazing or cracking in a multilayer dielectric optical coating is induced when the overall coating stress is sufficiently tensile, and is an occasionally observed issue when employing more porous deposition techniques like electron-beam evaporation. In this study, electron-beam high-reflectors were fabricated utilizing process parameters that are known to induce crazing based on prior processing history to systematically evaluate the impact of crazing on reflector damage performance for 1064 and 355 nm lasers. The crazing that was observed was apparently nucleated at nodular defects. When the cross-section of these nodules was investigated, it was observed that there were cracks into the fused silica substrate of approximately 5 µm in depth. The craze lines were irradiated with 1064 and 355 nm light at fluences slightly above the onset of damage initiation fluence of the coating. The 1064 nm irradiated sub-apertures exhibit laser damage but with no spatial correlation with the craze line, whereas the 355 nm irradiated area exhibited many damage sites along the craze line. Finite-difference time-domain electric-field simulations were conducted, and ∼2× field amplification in hafnia was observed for the 355 nm wavelength case. The laser damage can be attributed to a slight electric-field intensification coincidental with an area where UV damage-prone precursors are known to occur. The 355 nm laser damage in uncoated fused silica substrates has been previously correlated to initiate through localized UV absorption at the broken silica bonds in the tips of fractures.Keywords
Funding Information
- U.S. Department of Energy (DE-AC52-07NA27344)
- Lawrence Livermore National Laboratory (23-ERD-006)
This publication has 51 references indexed in Scilit:
- Material ejection and layer peeling-off in HfO2/SiO2 thin-film beam splitters induced by 1ω and 3ω lasersOptical Materials, 2022
- Analysis of the multi-cracking mechanism of brittle thin films on elastic-plastic substratesInternational Journal of Solids and Structures, 2019
- Materials Science and Technology of Optical Fabrication2018
- Brittle film-induced cracking of ductile substratesActa Materialia, 2015
- Improvement of the laser-induced damage threshold of oxide/fluoride double stack high reflective coatings at 355nm by introducing interlayersApplied Surface Science, 2013
- Numerical simulations for description of UV laser interaction with gold nanoparticles embedded in silicaApplied Physics B, 2004
- Channel-cracking of thin films with the extended finite element methodEngineering Fracture Mechanics, 2003
- The effects of particle pollution on the mechanical behaviour of multilayered systemsThin Solid Films, 1999
- Initial performance results of the OMEGA laser systemOptics Communications, 1997
- Compression of amplified chirped optical pulsesOptics Communications, 1985