Effect of Fine Aggregate Gradation on Macro and Micro Properties of Cold Recycling Mixture Using Emulsified Asphalt
Open Access
Abstract
In order to explore the influence of fine aggregate on the macro and micro properties of cold recycling mixture using emulsified asphalt (CRME), mechanical and microscopic property tests were carried out. The indirect tensile strength (ITS), unconfined compressive strength (UCS) and triaxial shear strength of different fine aggregate gradation was measured for analyzing the effects of fine aggregate on the mechanical strength, triaxial shear resistance and fracture energy of CRME. Meanwhile, the surface morphologies and air voids distribution of different CRME were observed by scanning electron microscopy (SEM) and X-ray computed tomography (X-ray CT). The results show that fine aggregate has a significant effect on the mechanical strength and shear resistance of CRME. With the same water and asphalt content, the fracture energy and failure strain of the mixture with less fine aggregate (G3-2) decreased by 16.2% and 18.2%, respectively. The less content of powder there was, the fewer cement hydration products there were due to some cement being coated by emulsified asphalt and the “cement hydration products fiber” length being shorter. Approximately 70% of the AFt hydration products in the G3-2 mixture were in the range of 1–4 μm, while those in the G1 mixture were in the range of 4–8 μm. With the increase in filler content, the number of air voids in the volume range of 0.5 mm3 ≤ V < 5 mm3 in CRME decreased, and the number of air voids in the volume range of V < 0.5 mm3 significantly increased, while the equivalent radius of air voids decreased slightly with the increase in filler content.Keywords
Funding Information
- Natural Science Foundation of Shandong Province (ZR2020QE273, ZR2020KE007, 2019KJG004)
- Key Program of Shandong Provincial Natural Science (ZR2020QE273, ZR2020KE007, 2019KJG004)
- Shandong Provincial Young Scholars Innovative Research Team Development Program in Colleges and Universities (ZR2020QE273, ZR2020KE007, 2019KJG004)
This publication has 22 references indexed in Scilit:
- Grey target optimization and the mechanism of cold recycled asphalt mixture with comprehensive performanceConstruction and Building Materials, 2019
- Reliability study on fracture and fatigue behavior of pavement materials using SCB specimenInternational Journal of Pavement Engineering, 2018
- Development of microstructure and early-stage strength for 100% cold recycled asphalt mixture treated with emulsion and cementConstruction and Building Materials, 2018
- Investigation of reclaimed asphalt pavement blending efficiency based on micro-mechanical properties of layered asphalt bindersConstruction and Building Materials, 2018
- Characteristics of damaged asphalt mixtures in tension and compressionInternational Journal of Pavement Engineering, 2017
- Investigation of early-stage strength for cold recycled asphalt mixture using foamed asphaltConstruction and Building Materials, 2016
- Mix design of bitumen-stabilised materials – South Africa and abroadRoad Materials and Pavement Design, 2016
- Environmental comparison of two alternative road pavement rehabilitation techniques: cold-in-place-recycling versus traditional reconstructionJournal of Cleaner Production, 2016
- Research on development mechanism of early-stage strength for cold recycled asphalt mixture using emulsion asphaltConstruction and Building Materials, 2015
- Characterization of air voids in cold in-place recycling mixtures using X-ray computed tomographyConstruction and Building Materials, 2015