Strengthening strategies for unreinforced stone masonry walls using FRP and CFM composites
Author:
Open Access
- 1 August 2025
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-12
Abstract
Recent earthquakes have highlighted the vulnerability of unreinforced masonry (URM) walls particularly those constructed with stone to lateral loads, underscoring the need for effective strengthening against shear failure. In this context, fiber-reinforced polymer (FRP) and carbon fiber mesh (CFM) have been explored as innovative alternatives to traditional reinforcement techniques. This study investigated unreinforced stone masonry walls, a common type of URM, strengthened using FRP and CFM materials in different configurations, focusing on the walls’ in-plane shear behavior under diagonal compression testing. A reference specimen, labeled URM-1, was constructed without reinforcement. FRP materials were applied to two specimens either horizontally or diagonally on both wall surfaces. Similarly, two specimens were strengthened on both surfaces using CFM, applied with either epoxy or repair mortar. Based on experimental and analytical results, the URM-5 specimen (CFM with epoxy) was identified as the most effective strengthening method. It significantly increased maximum load capacity, shear stress, ductility, and elastic stiffness. Additionally, the URM-5 specimen reduced wall fragility and maintained structural integrity during fracture.Keywords
Funding Information
- Aksaray Üniversitesi , Türkiye (2022/025)
This publication has 38 references indexed in Scilit:
- Assessment of in-plane shear behavior of historical andesite stone–Khorasan mortar masonry walls strengthened with CFRP-based techniques and repair mortarComposites Part B: Engineering, 2025
- Shear capacity of masonry panels repaired with composite materials: Experimental and analytical investigationsComposites Part B: Engineering, 2019
- In-plane shear capacity of tuff masonry walls with traditional and innovative Composite Reinforced Mortars (CRM)Construction and Building Materials, 2019
- Investigation of seismic performance of in-plane aligned masonry panels strengthened with Carbon Fiber Reinforced PolymerConstruction and Building Materials, 2018
- Experimental characterization of in-plane behaviour of old masonry walls strengthened through the addition of CFRP reinforced renderComposites Part B: Engineering, 2018
- Effect of different retrofitting techniques on in-plane behavior of masonry wallettesConstruction and Building Materials, 2018
- Experimental diagonal tension (shear) test of Un-Reinforced Masonry (URM) walls strengthened with textile reinforced mortar (TRM)Construction and Building Materials, 2018
- Experimental study of the in-plane cyclic behaviour of masonry walls strengthened by composite materialsConstruction and Building Materials, 2018
- Experimental investigation on out-of-plane behavior of GFRP retrofitted masonry panelsConstruction and Building Materials, 2017
- Shear behaviour of masonry walls strengthened by external bonded FRP and TRCComposite Structures, 2015