An experimental investigation on surface quality and water absorption of extruded wood–plastic composite
Authors:
- 30 November 2011
- journal article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 26 (5) , 680-698
Abstract
This article presents an experimental study on the relationship between surface quality (roughness) and water absorption for wood–plastic composites (WPCs) in an extrusion process. A problem that usually occurs in the production of extruded parts of polymeric materials, and in special case of WPC, is flow instabilities at the extrusion die exit. The instabilities lead to the production of profiles with unacceptable surface quality. In this article, the influences of the important material and process parameters on the surface quality and water absorption are investigated. The attempt was made to find a relationship between surface roughness and water absorption of WPC extruded profiles. The variable parameters were selected as wood content, polymer melt flow index (MFI), screw speed, melt temperature, die diameter, and finally length-to-diameter ratio (L/D) of the die land. The experiments specified that increasing die land L/D, die temperature and wood content and decreasing screw speed and polymer MFI lead to improved surface quality. It was found that increasing die diameter and also decreasing die land L/D, die temperature, speed, wood content, and polymer MFI lead to an improvement in water resistance. The results also showed that a rough surface quality could cause a low water resistance specification.Keywords
This publication has 40 references indexed in Scilit:
- Theoretical and Experimental Study on Die Pressure Prediction in Extrusion of Wood-Plastic CompositeJournal of Composite Materials, 2009
- Effects of polymer molecular weight and filler particle size on flow behavior of wood polymer compositesPolymer Composites, 2008
- A two-dimensional numerical study of the stick–slip extrusion instabilityJournal of Non-Newtonian Fluid Mechanics, 2007
- Dynamics of molecules adsorbed on a die wall during polymer melt extrusionJournal of Non-Newtonian Fluid Mechanics, 2005
- Flow birefringence study of the stick–slip instability during extrusion of high-density polyethylenesJournal of Non-Newtonian Fluid Mechanics, 2003
- Wall slip and extrudate distortion of three polymer meltsJournal of Rheology, 2003
- Postponing sharkskin of metallocene polyethylenes at low temperatures: the effect of molecular parametersPolymer, 2003
- Stick and slip phenomena during extrusion of polyethylene melts as investigated by laser-Doppler velocimetryJournal of Rheology, 2000
- Molecular instabilities in capillary flow of polymer melts: Interfacial stick‐slip transition, wall slip and extrudate distortionMacromolecular Chemistry and Physics, 1997
- Sharkskin and cracking of polymer melt extrudatesJournal of Non-Newtonian Fluid Mechanics, 1997