Effect of rubber/matrix interfacial modifications on the properties of a rubber‐toughened epoxy resin
Authors:
- 1 April 1991
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 31 (8) , 577-585
Abstract
The interface of a rubber‐toughened epoxy resin was modified by using epoxide end‐capped carboxyl‐terminated butadiene and acrylonitrile random copolymer (CTBN). The end‐capping epoxides were formulated with different ratios of flexible diglycidyl ether of propylene glycol (DER732) and rigid diglycidyl ether of bisphenol‐A (Epon 828). The microstructure and the fracture behavior of these rubber‐modified epoxy resins were studied by transmission electron microscopy (TEM) and scanning electron microscopy (SEM), respectively. The thermal and mechanical properties were also investigated. With an increase in the amount of end‐capping DER732, the interfacial zone of an undeformed rubber particle and the degree of cavitation of the rubber cavity on the fracture surface were greatly increased. At the maximal addition of DER732, fracture energy (GIc) for this toughened epoxy resin containing 10phr CTBN rubber increases up to 2.4 fold compared to that of a conventional CTBN‐toughened epoxy resin, but the thermal and the mechanical properties remained quite unaffected. The modification on the interfacial property provides a new technique in the improvement of fracture toughness of a rubber‐toughened epoxy resin.Keywords
This publication has 20 references indexed in Scilit:
- Toughening mechanisms in elastomer-modified epoxiesJournal of Materials Science, 1989
- Effect of ultraviolet irradiation on the ice-nucleating ability of the AgI-AgBr-Cul systemJournal of Materials Science Letters, 1987
- Liquid‐rubber‐modified epoxy adhesives cured with dicyandiamide. I. Preparation and characterizationJournal of Applied Polymer Science, 1986
- Toughening mechanisms in elastomer-modified epoxiesJournal of Materials Science, 1986
- Toughening mechanisms in elastomer-modified epoxiesJournal of Materials Science, 1986
- Rubber-Modified Epoxies1984
- Low-temperature behaviour of epoxy-rubber particulate compositesJournal of Materials Science, 1981
- Characterization of the phase structure of an amine cured rubber modified epoxyPolymer, 1981
- Rubber Toughened Thermosets1976
- Modified osmium tetroxide stain for the microscopy of rubber‐toughened resinsJournal of Polymer Science Part A-1: Polymer Chemistry, 1971