Study on the Optimal Design for Cavitation Reduction in the Vortex Suction Cup for Underwater Climbing Robot
Open Access
- 6 January 2022
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (1) , 70
Abstract
In order to adhere to the wall stably in an underwater environment, a vortex suction cup that injects high-pressure water inside via two axisymmetrically side-distributed inlets to create a negative pressure area in the center is the necessary component for the underwater climbing robot (UCR). However, the suction force of this vortex suction cup is reduced and periodically unstable due to unstable cavitation. The aim of this paper is to propose a cavitation reduction optimization method for vortex suction cups and to verify the effectiveness of the optimization. Analyses of this vortex flow, including streamlines, pressure, and cavitation number fluctuations, were carried out by the introduced computational fluid dynamics (CFD) simulating methods based on the multiphase RNG model to study the periodic fluctuations of the suction force of the original suction cup and the optimized ones. Force measurement and vortex observation experiments were conducted to compare the suction force of the original vortex suction cup and the optimized suction cup, as well as the cavitation and pressure fluctuation phenomenon. Results of simulation and experiments prove the existence of the effect of vortex cavitation on the suction performance and verify the rationality of optimization as well.
Keywords
Funding Information
- National Natural Science Foundation of China (51979246, 52071292)
- the Key Research and Development Program of Zhejiang Province (2019C03101)
- Ningbo Science and Technology Innovation 2025 Major Special Project (2020Z075)
This publication has 30 references indexed in Scilit:
- Development of a new noncontact gripper using swirl vanesRobotics and Computer-Integrated Manufacturing, 2013
- Computational Fluid Dynamics Study of a Noncontact Handling Device Using Air-Swirling FlowJournal of Engineering Mechanics, 2011
- A Bernoulli principle gripper for handling of planar and 3D (food) productsIndustrial Robot: the international journal of robotics research and application, 2010
- Performance of a non-contact handling device using swirling flow with various gap heightJournal of Visualization, 2010
- Modeling and Prediction of the Flow, Pressure, and Holding Force Generated by a Bernoulli Handling DeviceJournal of Manufacturing Science and Engineering, 2009
- Grasping leather plies by Bernoulli grippersCIRP Annals, 2009
- Analysis of vortex levitationExperimental Thermal and Fluid Science, 2008
- CROMSCI: development of a climbing robot with negative pressure adhesion for inspectionsIndustrial Robot: the international journal of robotics research and application, 2008
- A reversible wet/dry adhesive inspired by mussels and geckosNature, 2007
- A Theoretical Analysis of Alternate Blade Cavitation in InducersJournal of Fluids Engineering, 1999