Cyclic fatigue of ProFile rotary instruments after prolonged clinical use
Author:
- 1 July 2001
- journal article
- research article
- Published by Wiley in International Endodontic Journal
- Vol. 34 (5) , 386-389
Abstract
Aim: The purpose of the present study was to evaluate resistance to cyclic fatigue of new and used ProFile Ni–Ti rotary instruments.Methodology: Used instruments were operated in 10 clinical cases using passive instrumentation and a crown‐down preparation technique. Cyclic fatigue testing of new and used engine‐driven instruments was then performed with a specific device which allowed the instruments to rotate freely inside a stainless steel artificial canal, whilst maintaining conditions close to the clinical situation. Instruments were rotated until fracture occurred and time to fracture was visually recorded with a chronometer.Results: A significant reduction of rotation time to breakage (life span) was noted between new and used instruments. In all sizes new instruments were significantly more resistant than used ones (two‐sample t‐test, P < 0.01). No instrument underwent intracanal failure during clinical use.Conclusions: Prolonged clinical use of Ni–Ti engine‐driven instruments significantly reduced their cyclic fatigue resistance. Nevertheless, each rotary instrument was successfully operated in up to 10 clinical cases without any intracanal failure.Keywords
This publication has 8 references indexed in Scilit:
- Dynamic and cyclic fatigue of engine-driven rotary nickel-titanium endodontic instrumentsJournal of Endodontics, 1999
- Cyclic fatigue of Profile rotary instruments after simulated clinical useInternational Endodontic Journal, 1999
- Cyclic fatigue testing of nickel-titanium endodontic instrumentsJournal of Endodontics, 1997
- Shaping ability of ProFile.04 Taper Series 29 rotary nickel‐titanium instruments in simulated root canals. Part 1International Endodontic Journal, 1997
- Comparison of nickel-titanium and stainless steel hand-file instrumentation using computed tomographyJournal of Endodontics, 1996
- A comparison of root canal preparations using Ni-Ti hand, Ni-Ti engine-driven, and K-Flex endodontic instrumentsJournal of Endodontics, 1995
- Torsional and stiffness properties of canal master U stainless steel and nitinol instrumentsJournal of Endodontics, 1994
- An initial investigation of the bending and torsional properties of nitinol root canal filesJournal of Endodontics, 1988