Strength differences arising from homogeneous versus heterogeneous dislocation nucleation
- 29 February 2008
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review B
- Vol. 77 (6) , 060103
Abstract
We show that it is possible to distinguish between homogeneous and heterogeneous dislocation nucleation on the basis of differences in experimentally measured theoretical strengths. From nanoindentation tests, the critical shear stress for dislocation nucleation in two different Mo-alloy single crystals (Mo-3Nb and Mo-10Al-4Ni) is found to be of the shear modulus. The corresponding stress in uniaxially compressed Mo-10Al-4Ni micropillars is of the shear modulus. This strength difference is due to the higher critical stress required to nucleate a full dislocation loop homogeneously in the bulk as opposed to a half or quarter loop heterogeneously at a surface or edge.
Keywords
This publication has 24 references indexed in Scilit:
- Deformation at the nanometer and micrometer length scales: Effects of strain gradients and dislocation starvationThin Solid Films, 2007
- Influence of Indenter Tip Geometry on Elastic Deformation during NanoindentationPhysical Review Letters, 2005
- Time-dependent incipient plasticity in Ni3Al as observed in nanoindentationJournal of Materials Research, 2005
- Ideal shear strain of metals and ceramicsPhysical Review B, 2004
- Sample Dimensions Influence Strength and Crystal PlasticityScience, 2004
- Application of nucleation theory to the rate dependence of incipient plasticity during nanoindentationJournal of Materials Research, 2004
- Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 2004
- Plastic Deformation of Copper and Silver WhiskersJournal of Applied Physics, 1957
- Tensile Strength of WhiskersJournal of Applied Physics, 1956
- Dislocations and Plastic Flow in CrystalsAmerican Journal of Physics, 1954