Additive Manufacturing of Titanium with Different Surface Structures for Adhesive Bonding and Thermal Direct Joining with Fiber-Reinforced Polyether-Ether-Ketone (PEEK) for Lightweight Design Applications
Open Access
Abstract
Hybrid joints consisting of metals and fiber-reinforced polymer composites exhibit highly desirable properties for many lightweight design applications. This study investigates the potential of additively manufactured surface structures for enhancing the bond strength of such joints in comparison to face milled and laser structured surfaces. Titanium samples with different surface structures (as-built surface, groove-, and pin-shaped structures) were manufactured via electron beam melting and joined to carbon fiber-reinforced polyether-ether-ketone (PEEK) via adhesive bonding and thermal direct joining, respectively. Bond strength was evaluated by tensile shear testing. Samples were exposed to salt spray testing for 1000 h for studying bond stability under harsh environmental conditions. The initial tensile shear strengths of the additively manufactured samples were competitive to or in some cases even exceeded the values achieved with laser surface structuring for both investigated joining methods. The most promising results were found for pin-shaped surface structures. However, the hybrid joints with additively manufactured structures tended to be more susceptible to degradation during salt spray exposure. It is concluded that additively manufactured structures can be a viable alternative to laser surface structuring for both adhesive bonding and thermal direct joining of metal-polymer hybrid joints, thus opening up new potentials in lightweight design.Keywords
This publication has 28 references indexed in Scilit:
- Lightweight in Automotive Components by Forming TechnologyAutomotive Innovation, 2020
- Experimental and analytical study of an CF-PEEK Fastener all composites single-lap shear joint under static and fatigue loadingCEAS Aeronautical Journal, 2018
- Laser structured surfaces for metal-plastic hybrid joined by injection moldingJournal of Laser Applications, 2018
- AddJoining: A novel additive manufacturing approach for layered metal-polymer hybrid structuresMaterials Letters, 2018
- Load distribution in threads of porous metal–ceramic functionally graded composite joints subjected to thermomechanical loadingComposite Structures, 2015
- Preparation and thermodynamic analysis of the porous ZrO2/(ZrO2 + Ni) functionally graded bolted jointComposites Part B: Engineering, 2015
- Innovative approach of joining hybrid componentsJournal of Laser Applications, 2011
- Hybrid CFRP/titanium bolted joints: Performance assessment and application to a spacecraft payload adaptorComposites Science and Technology, 2010
- Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bondingComposite Structures, 2006
- Structure–properties relations in titanium‐based thermoplastic fiber–metal laminatesPolymer Composites, 2006