A Mechanical Flux Weakening Method for Switched Flux Permanent Magnet Machines
Authors:
- 31 December 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 30 (2) , 806-815
Abstract
Several switched flux permanent magnet (SFPM) machines with mechanically movable flux adjusting technique are proposed, analyzed, and compared for applications which demand high speed and efficiency. By using ferromagnetic pieces--one per every stator pole or every alternative stator pole, which are named as flux adjusters (FAs) and located on the outside surface of the stator-the airgap flux density can be weakened and therefore the operation speed range and flux weakening capability can be improved. The influence of using all or alternative FAs on the open circuit results, electromagnetic performance, and torque-speed characteristics of the SFPM machine is investigated through three SFPM machines with different stator/rotor pole combinations, i.e., 12/10, 12/13, and 12/14. Moreover, although using FAs in all stator poles can significantly improve the flux weakening capability, alternative FAs can also achieve remarkable improvement although higher torque ripple is observed. Additionally, it has been found that the 12/13 combination is considered to be the most suitable candidate for alternative FAs technique. In addition to 2-D finite-element analysis (FEA) and analytical methods, 3-D FEA results accounting for the end-effect are presented. Furthermore, experiments are performed to validate the results.Keywords
This publication has 35 references indexed in Scilit:
- Mechanically adjusted variable-flux concept for switched-flux permanent-magnet machines2011
- Flux-Weakening Control of Nonsalient Pole PMSM Having Large Winding Inductance, Accounting for Resistive Voltage Drop and Inverter NonlinearitiesIEEE Transactions on Power Electronics, 2011
- A Novel Hybrid-Excited Switched-Flux Brushless AC Machine for EV/HEV ApplicationsIEEE Transactions on Vehicular Technology, 2011
- Development of variable magnetic flux motor suitable for electric vehicle2010
- Winding Configurations and Optimal Stator and Rotor Pole Combination of Flux-Switching PM Brushless AC MachinesIEEE Transactions on Energy Conversion, 2009
- Active Output Voltage Regulation for an Ironless Axial-Flux PM Automotive Alternator With Electromechanical Flux WeakeningIEEE Transactions on Industry Applications, 2009
- Influence of Skew and Cross-Coupling on Flux-Weakening Performance of Permanent-Magnet Brushless AC MachinesIEEE Transactions on Magnetics, 2009
- Design considerations for permanentmagnet synchronousmotors for flux weakening applicationsIEE Proceedings - Electric Power Applications, 1998
- Field-weakening performance of brushless synchronous AC motor drivesIEE Proceedings - Electric Power Applications, 1994
- Effects and Compensation of Magnetic Saturation in Flux-Weakening Controlled Permanent Magnet Synchronous Motor DrivesIEEE Transactions on Industry Applications, 1994