Archard wear and component geometry
Authors:
- 1 April 2001
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 215 (4) , 387-403
Abstract
The wear performance of tribological material pairs is commonly assessed by experimental investigations which make use of rigs incorporating a pin-on-disc geometry. The information so generated is conventionally interpreted in terms of a linear relation between wear volume, applied load and sliding distance in accord with the Archard wear equation. An appropriate material parameter is thus the so-called dimensional wear rate usually measured in mm3/N m. However, there are many practical situations in which, as components wear, the area of apparent contact changes so that, although the Archard relation may still be applicable on the microscale, the relation between either the macroscopic wear dimension, or the total wear volume, may be other than a linear function of sliding distance or load. The following examples are considered: a spherically ended pin sliding or rotating against a flat, a pair of crossed cylinders, a radially loaded journal bearing and a radially loaded spherical bearing. Data from the wear literature are examined in the light of the analyses presented.Keywords
This publication has 7 references indexed in Scilit:
- Wear modelling: analytical, computational and mapping: a continuum mechanics approachWear, 1999
- Simulating sliding wear with finite element methodTribology International, 1999
- Tribological behaviours of carbon filled polytetrafluoroethylene (PTFE) dry journal bearingsWear, 1998
- An evaluation of the penetration of ceramic femoral heads into polyethylene acetabular cupsWear, 1993
- Principles of Tribology1978
- The wear of metals under unlubricated conditionsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1956
- Contact and Rubbing of Flat SurfacesJournal of Applied Physics, 1953