Determination of changes in wastewater quality through a treatment works using fluorescence spectroscopy
- 20 June 2013
- journal article
- research article
- Published by Taylor & Francis in Environmental Technology
- Vol. 34 (23) , 3069-3077
Abstract
Fluorescence spectroscopy was used to characterize municipal wastewater at various stages of treatment in order to understand how its fluorescence signature changes with treatment and how the signal relates to biochemical oxygen demand (BOD) and chemical oxygen demand (COD). The impact of size fractionation on the fluorescence signal was also investigated. Fluorescence measurements were taken for unfiltered and filtered (0.45 and 0.20 μm) samples of crude, settled and secondary treated wastewater (activated sludge and trickling filter), and final effluent. Good correlations were observed for unfiltered, diluted wastewater samples between BOD and fluorescence intensity at excitation 280 nm, emission 350 nm (Peak T1) (r=0.92) and between COD and Peak T1 intensity (r=0.85). The majority of the T1 and T2 signal was found to be derived from the<0.20 μm fraction. Initial results indicate that fluorescence spectroscopy, and changes in Peak T1 intensity in particular, could be used for continuous, real-time wastewater quality assessment and process control of wastewater treatment works.Keywords
This publication has 21 references indexed in Scilit:
- Behavior of Reoccurring PARAFAC Components in Fluorescent Dissolved Organic Matter in Natural and Engineered Systems: A Critical ReviewEnvironmental Science & Technology, 2012
- The application of fluorescence spectroscopy to organic matter characterisation in drinking water treatmentReviews in Environmental Science and Bio/Technology, 2011
- Fluorescence as a potential monitoring tool for recycled water systems: A reviewWater Research, 2009
- Can fluorescence spectrometry be used as a surrogate for the Biochemical Oxygen Demand (BOD) test in water quality assessment? An example from South West EnglandScience of The Total Environment, 2008
- Fluorescence analysis of dissolved organic matter in natural, waste and polluted waters—a reviewRiver Research and Applications, 2007
- On‐line monitoring of wastewater quality: a reviewJournal of Chemical Technology & Biotechnology, 2001
- Rapid and direct determination of wastewater BOD values using a fluorescence techniqueWater Research, 1997
- The effect of metal ions on the fluorescence of sewage wastewaterWater Research, 1995
- Synchronous fluorescence spectroscopy of wastewater and some potential constituentsWater Research, 1995
- Measurement of wastewater treatment efficiency by fluorescence and UV absorbanceEnvironmental Monitoring and Assessment, 1985