Accurate equivalent circuit design of an ultra-broadband composite absorber
Authors:
- Kaihuai WenKWKaihuai Wen
- Xiuli YueXYXiuli Yue
- Junyi NangongJNJunyi Nangong
- Zixuan XieZXZixuan Xie
- Peiheng ZhouPZPeiheng Zhou
- Difei LiangDLDifei Liang
- Tiancheng HanTHTiancheng Han
- 27 January 2025
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (3) , 3920-3929
Abstract
The combination of circuit analog absorber (CAA) and honeycomb absorbing material (HAM) has the advantages of lower profile, wider absorption bandwidth, and strong absorption performance. However, the increase in the number of CAA interlaced with various dielectric spacers makes the design and optimization of this complex multi-layer structure more difficult. Here, an accurate equivalent circuit model (ECM) of the multi-layer lossy single-square loop (SSL) metal-grounded is developed, which can be used to quickly design and optimize absorbers with the aid of genetic algorithm (GA). Based on the guideline, a lightweight composite absorber consisting of a double-layer impedance-sheet CAA at the top and a HAM at the bottom is developed. It covers an ultra-wideband -10 dB reflection reduction in the frequency band of 0.83 to 18 GHz with a fractional bandwidth of 182% in a total thickness of 35 mm and only 4% over the minimum thickness calculated by the Rozanov limit. The CAA is responsible for the absorption at a lower frequency, while the HAM absorbs the incident electromagnetic waves at the higher end of the frequency spectrum. The agreement between the experimental and simulated results verifies the viability of our design approach.Keywords
Funding Information
- National Natural Science Foundation of China (52425205)
This publication has 29 references indexed in Scilit:
- Lightweight Honeycomb rGO/Ti3C2Tx MXene Aerogel without Magnetic Metals toward Efficient Electromagnetic Wave Absorption PerformanceACS Applied Electronic Materials, 2023
- Conceptual-based design of an ultrabroadband microwave metamaterial absorberProceedings of the National Academy of Sciences, 2021
- MnO2 nanostructures deposited on graphene foams for broadband and lightweight electromagnetic absorptionJournal of Alloys and Compounds, 2019
- Catenary Electromagnetics for Ultra‐Broadband Lightweight Absorbers and Large‐Scale Flat AntennasAdvanced Science, 2019
- Low-Profile Broadband Absorbers Based on Capacitive SurfacesIEEE Antennas and Wireless Propagation Letters, 2016
- Ultrawideband Dispersion Control of a Metamaterial Surface for Perfectly-Matched-Layer-Like AbsorptionPhysical Review Letters, 2013
- A review and analysis of microwave absorption in polymer composites filled with carbonaceous particlesJournal of Applied Physics, 2012
- Ultimate thickness to bandwidth ratio of radar absorbersIEEE Transactions on Antennas and Propagation, 2000
- The design of Jauman absorbersIEEE Antennas and Propagation Magazine, 1994
- Optimum design of a Salisbury screen radarabsorberElectronics Letters, 1994