Interaction Effects of Three Major Crosslinking Byproducts on Space Charge Accumulation in Polyethylene
Authors:
- 15 April 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 28 (2) , 710-718
Abstract
In order to quantitatively analyze the interaction effects of crosslinking byproducts on charge characteristics in crosslinked polyethylene (XLPE), samples are prepared by soaking additive-free untreated polyethylene in three major byproducts, namely acetophenone (A), cumyl alcohol (C), and a-methylstyrene (M), and space charge measurement under relatively low electric fields of 3, 5, 7, and 10 kV/mm is carried out. The results show that the effect of C on space charge accumulation is comparable with that of A per unit byproduct content, and M exhibits the weakest effect. It is related to the different dissociation degrees of byproducts under different electric fields. An exponential fitting formula is proposed to clarify the significant synergistic and the antagonistic effects of the byproducts on charge accumulation. The synergistic effects on charge accumulation is obvious in LDPE-MC (LDPE soaked in the blend of M and C) at 3,7, and 10 kV/mm, but not at 5 kV/mm, and the LDPE-AC (LDPE soaked in the blend of A and C) shows the same rule at 5, 7, and 10 kV/mm, except for 3 kV/mm. The LDPE-AM (LDPE soaked in the blend of A and M) has antagonistic effects on charge accumulation at 5, 7, and 10 kV/mm, and shows a trend from synergistic effects to antagonistic effects at 3 kV/mm. For LDPE-ACM (LDPE soaked in the blend of A, C and M), synergistic effects are dominant at 3, 5 and 7 kV/mm, then antagonistic effects are obvious at 10 kV/mm. The different rule on space charge accumulation may be due to the discrepant charge injection under different electric fields according to the results of charge distribution with individual byproducts.Keywords
This publication has 16 references indexed in Scilit:
- Computational study on acetophenone in amorphous polyethyleneJournal of Molecular Modeling, 2017
- Review of recent research towards power cable life cycle managementHigh Voltage, 2017
- Evaluation of polypropylene/polyolefin elastomer blends for potential recyclable HVDC cable insulation applicationsIEEE Transactions on Dielectrics and Electrical Insulation, 2015
- The role of degassing in XLPE power cable manufactureIEEE Electrical Insulation Magazine, 2006
- From LDPE to XLPE: investigating the change of electrical properties. Part I. space charge, conduction and lifetimeIEEE Transactions on Dielectrics and Electrical Insulation, 2005
- Effects of crosslinking byproducts on space charge formation in crosslinked polyethyleneIEEE Transactions on Dielectrics and Electrical Insulation, 2005
- Chemical group in crosslinking byproducts responsible for charge trapping in polyethyleneIEEE Transactions on Dielectrics and Electrical Insulation, 2003
- Dynamic observation of space charge formation in XLPE using pulsed electro-acoustic method2002
- Role of additives as recombination centres in polyethylene materials as probed by luminescence techniquesJournal of Physics D: Applied Physics, 2001
- Space-charge trapping and conduction in LDPE, HDPE and XLPEJournal of Physics D: Applied Physics, 2001