Reduction of ZnO Using Hydrogen: A Kinetic Study and Microstructure Evolution Analysis
Open Access
- 19 September 2025
- journal article
- research article
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 11 (4) , 3606-3627
Abstract
This study investigates the kinetics of ZnO reduction using hydrogen gas mixtures of 15% H 2 -Ar, 50% H 2 -Ar, and 100% H 2 as the reducing agent. The reaction kinetics were analyzed at temperatures ranging from 600 to 1000 °C to determine the reaction rate and possible rate-controlling mechanism. Weight-loss data of pellets obtained from reduction experiments conducted in a resistance heating furnace were used as input for the kinetic analysis. Kinetic model-fitting analysis indicated that the ZnO reduction reaction appeared to be controlled by chemical reaction at the gas–solid interface. Higher temperatures and hydrogen concentrations significantly enhance the reaction rate, leading to an increased overall reduction degree. The activation energies for experiments carried out at 15% H 2 -Ar, 50% H 2 -Ar, and 100% H 2 were calculated to be 118 kJ/mol, 110 kJ/mol, and 104 kJ/mol, respectively. This small variation in the activation energy indicates that the rate-limiting mechanism remains largely unchanged within the investigated hydrogen concentration range. Microstructure evolution analysis of the reduced ZnO pellet shows that the reduction reaction occurred simultaneously at both the center and surface of the pellet. The reduced pellet showed a porous morphology. Initially, the pellet develops a fine, uniform porous microstructure. However, over time, larger pores form, accompanied by sintering of the unreduced ZnO pellet. Meanwhile, the sublimated Zn gas was successfully captured and condensed as metallic zinc in the condenser. Graphical AbstractKeywords
Funding Information
- ARC Steel Innovation Hub (IH200100005)
- Swinburne University of Technology
This publication has 42 references indexed in Scilit:
- Separation of Li and Co from LiCoO2 Cathode Material Through Aluminothermic Reduction: Thermodynamic Calculations and Experimental ResultsMetallurgical and Materials Transactions B, 2023
- A Review on Processing of Electric Arc Furnace Dust (EAFD) by Pyro-Metallurgical ProcessesTransactions of the Indian Institute of Metals, 2022
- Reduction of Iron Oxides with Hydrogen—A ReviewSteel Research International, 2019
- Clean Ironmaking and Steelmaking Processes: Efficient Technologies for Greenhouse Emissions Abatement2019
- Selective Zinc Removal from Electric Arc Furnace (EAF) Dust by Using Microwave HeatingJournal of Sustainable Metallurgy, 2019
- Investigation of Selective Reduction of Iron Oxide in Zinc Ferrite by Carbon and HydrogenJournal of Sustainable Metallurgy, 2015
- New pyrometallurgical process of EAF dust treatment with CaO additionInternational Journal of Minerals, Metallurgy and Materials, 2015
- Minimizing dioxin and furan emissions during zinc dust recycle by the waelz processJOM, 2003
- Recovery of Zinc Oxide from Secondary Raw Materials: New Developments of the Waelz Process2000
- Thermogravimetrische Untersuchung der ZnO + H2-Reaktion in strömendem WasserstoffMicrochimica Acta, 1966