Dynamic Response and Energy-Based Upper Bound Analysis of Multi-Mode Failure in Anchored Slopes under Near-Fault Pulse Earthquakes Considering Cable Degradation
The pulse effect of near-fault ground motions induces intense dynamic responses and cumulative damage in anchored rock slope systems, frequently leading to cascading failures and severe engineering disasters. Traditional limit equilibrium and upper-bound analysis methods typically simplify anchor cables as equivalent force terms, making it difficult to characterize their elastoplastic evolution, time-varying stiffness degradation, and the dynamic coupling effects among multiple sliding blocks. Consequently, these methods are insufficient to explain the complete process of seismic-induced cable damage and subsequent slope instability. To address these limitations, this paper proposes a dynamic upper-bound analysis framework for anchored slopes subjected to near-fault pulse-like earthquakes. By establishing an anchor cable performance degradation model, a multi-block coupled dynamic model, and multi-stage dynamic response governing equations, an integrated solution for dynamic response, performance degradation, and failure determination of anchor cables is achieved. The results indicate that: (1) The developed theoretical model accurately captures the complete failure path of anchor cables. Under identical computational resources, it significantly enhances the efficiency of single dynamic simulations, effectively overcoming the computational bottlenecks inherent in traditional numerical methods. (2) The failure of anchor cables is primarily governed by the cumulative plastic slip along the sliding surface. The introduced displacement-force dynamic mapping mechanism reveals a bottom-up cascading propagation characteristic, where cables at the slope toe fail first in complex sliding bodies. (3) Pulse-like ground motions trigger abrupt surges in axial forces, which easily induce instantaneous and widespread cascading collapse under brittle failure modes. Conversely, ductile systems can improve the ultimate bearing capacity by 0.2g-0.3g and delay the time of failure by leveraging plastic energy dissipation.