Synthesis and characterization of silica gel from siliceous sands of southern Tunisia
Open Access
- 1 September 2014
- journal article
- Published by Scientific Scholar in Arabian Journal of Chemistry
- Vol. 7 (4) , 486-493
Abstract
The present work aimed to achieve valorization of Albian sands for the preparation of sodium silicates that are commonly used as a precursor to prepare silica gel. A siliceous sand sample was mixed with sodium carbonate and heated at a high temperature (1060 °C) to prepare sodium silicates. The sodium silicates were dissolved in distilled water to obtain high quality sodium silicate solution. Hydrochloric acid was then slowly added to the hydrated sodium silicates to obtain silica gel. The collected raw siliceous sands, as well as the prepared silica gels, were characterized by different techniques, such as X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM) and thermal analysis (DSC). XRF confirmed that the detrital sand deposits of southern Tunisia contain high amounts of silica, with content ranging from 88.8% to 97.5%. The internal porosity varied between 17% and 22%, and the specific surface area was less than 5 m2/g. After the treatment described above, it was observed that the porosity of the obtained silica gel reached 57% and the specific surface area exceeded 340 m2/g. Nitrogen adsorption isotherms showed that the prepared silica gels are microporous and mesoporous materials with high adsorption capacities. These results suggest that the obtained silica gels are promising materials for numerous environmental applicationsKeywords
This publication has 14 references indexed in Scilit:
- Mineralogical and spectroscopic characterization, and potential environmental use of limestone from the Abiod formation, TunisiaEnvironmental Earth Sciences, 2010
- Study on the potential use of Tunisian clays as pozzolanic materialApplied Clay Science, 2006
- Pore structure of silica gel: a comparative study through BET and PALSChemical Physics, 2005
- Reuse of local sand: effect of limestone filler proportion on the rheological and mechanical properties of different sand concretesCement and Concrete Research, 2005
- Formation of spherical hollow silica particles from sodium silicate solution by ultrasonic spray pyrolysis methodColloids and Surfaces A: Physicochemical and Engineering Aspects, 2005
- Synthesis and grafting of silica aerogelsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2004
- The study of formation colloidal silica via sodium silicateMaterials Science and Engineering: B, 2004
- Characterization of silicas precipitated from solution of sodium metasilicate and hydrochloric acid in emulsion mediumPowder Technology, 2002
- Dinosaurs and other fossil vertebrates from fluvial deposits in the Lower Cretaceous of southern TunisiaPalaeogeography, Palaeoclimatology, Palaeoecology, 2000
- Adsorption Surface Area and PorosityJournal of the Electrochemical Society, 1967