Accessible Eco-Friendly Method for Wastewater Removal of the Azo Dye Reactive Black 5 by Reusable Protonated Chitosan-Deep Eutectic Solvent Beads
Open Access
Abstract
A novel approach to enhance the utilization of low-cost and sustainable chitosan for wastewater remediation is presented in this investigation. The study centers around the modification of chitosan beads using a deep eutectic solvent composed of choline chloride and urea at a molar ratio of 1:2, followed by treatment with sulfuric acid using an impregnation accessible methodology. The effectiveness of the modified chitosan beads as an adsorbent was evaluated by studying the removal of the azo dye Reactive Black 5 (RB5) from aqueous solutions. Remarkably, the modified chitosan beads demonstrated a substantial increase in adsorption efficiency, achieving excellent removal of RB5 within the concentration range of 25–250 mg/L, ultimately leading to complete elimination. Several key parameters influencing the adsorption process were investigated, including initial RB5 concentration, adsorbent dosage, contact time, temperature, and pH. Quantitative analysis revealed that the pseudo-second-order kinetic model provided the best fit for the experimental data at lower dye concentrations, while the intraparticle diffusion model showed superior performance at higher RB5 concentration ranges (150–250 mg/L). The experimental data were successfully explained by the Langmuir isotherm model, and the maximum adsorption capacities were found to be 116.78 mg/g at 298 K and 379.90 mg/g at 318 K. Desorption studies demonstrated that approximately 41.7% of the dye could be successfully desorbed in a single cycle. Moreover, the regenerated adsorbent exhibited highly efficient RB5 removal (80.0–87.6%) for at least five consecutive uses. The outstanding adsorption properties of the modified chitosan beads can be attributed to the increased porosity, surface area, and swelling behavior resulting from the acidic treatment in combination with the DES modification. These findings establish the modified chitosan beads as a stable, versatile, and reusable eco-friendly adsorbent with high potential for industrial implementation.Keywords
Funding Information
- Agencia Estatal de Investigación (Spain) (PID2019-107728RB-I00/AEI/10.13039/501100011033, GPC-ED431B 2020/08)
- Xunta de Galicia (PID2019-107728RB-I00/AEI/10.13039/501100011033, GPC-ED431B 2020/08)
This publication has 55 references indexed in Scilit:
- Chitosan-based beads as sustainable adsorbents for wastewater remediation: a reviewEnvironmental Chemistry Letters, 2023
- Adsorption of Reactive Black 5 and Basic Blue 12 using biochar from gasification residues: Batch tests and fixed-bed breakthrough predictions for wastewater treatmentBioresource Technology Reports, 2021
- Potential Reuse of PET Waste Bottles as a Green Substrate/Adsorbent for Reactive Black 5 Dye RemovalWater, Air, & Soil Pollution, 2020
- Adsorptive removal of anionic dyes from aqueous solutions using spent mushroom wasteApplied Water Science, 2020
- Deep eutectic solvents skeleton typed molecularly imprinted chitosan microsphere coated magnetic graphene oxide for solid‐phase microextraction of chlorophenols from environmental waterJournal of Separation Science, 2019
- Magnetic chitosan functionalized with β‐cyclodextrin as ultrasound‐assisted extraction adsorbents for the removal of methyl orange in wastewater coupled with high‐performance liquid chromatographyJournal of Separation Science, 2018
- Adsorbents made from textile scraps: preparation, characterization and application for removal of reactive dyeClean Technologies and Environmental Policy, 2018
- Adsorption of methyl orange onto protonated cross-linked chitosanArabian Journal of Chemistry, 2017
- Adsorption characteristics of tannic acid onto the novel protonated palygorskite/chitosan resin microspheresJournal of Applied Polymer Science, 2012
- Ionic interactions between sulfuric acid and chitosan membranesCarbohydrate Polymers, 2008