Removal of reactive black 5 in water using adsorption and electrochemical oxidation technology: kinetics, isotherms and mechanisms
Open Access
- 21 May 2024
- journal article
- research article
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 22 (2) , 1083-1106
Abstract
In this work, a novel graphite intercalation compound (GIC) particle electrode was used to investigate the adsorption of Reactive Black 5 (RB5) and the electrochemical regeneration in a three-dimensional (3D) electrochemical reactor to recover its adsorptive capacity. Various adsorption kinetics and isotherm models were used to characterise the adsorption behaviour of GIC. Several adsorption kinetics were modelled using linearised and non-linearised rate laws to evaluate the viability of the sorption process. Studies on the selective removal of RB5 dyes from binary mixture in solution were evaluated. RSM optimisation studies were integrated with ANOVA analysis to provide insight into the significance of selectivity reversal from the salting effect of textile dye solution on GIC adsorbent. A unique range of adsorption kinetics and isotherms were used to evaluate the adsorption process. Non-linear models best simulated the kinetic data in the order: Elovich > Bangham > Pseudo-second-order > Pseudo-first-order. The Redlich–Peterson isotherm was calculated to have a dye loading capacity of 0.7316 mg/g by non-linear regression analysis. An error function analysis with ERRSQ/SSE of 0.1390 confirmed the accuracy of dye loading capacity predicted by Redlich–Peterson isotherm using non-linear regression analysis. The results showed that Redlich–Peterson and SIPS isotherm models yielded better fitness to experimental data than the Langmuir type. The best dye removal efficiency achieved was ~ 93% using a current density of 45.14 mA/cm2, whereas the highest TOC removal efficiency achieved was 67%.Keywords
Funding Information
- University of Southern Queensland
This publication has 42 references indexed in Scilit:
- Electrochemical oxidation of direct blue 86 dye using MMO coated Ti anode: modelling, kinetics and degradation pathwayChemical Engineering and Processing - Process Intensification, 2022
- Electrochemical regeneration of a graphite adsorbent loaded with Acid Violet 17 in a spouted bed reactorChemical Engineering Journal, 2016
- Equilibrium, kinetics and thermodynamic parameters for adsorptive removal of dye Basic Blue 9 by ground nut shells and EichhorniaArabian Journal of Chemistry, 2016
- Adsorption isotherms and Sips models of nitrogen, methane, ethane, and propane on commercial activated carbons and polyvinylidene chlorideAdsorption, 2016
- A review of the kinetics adsorption models and their application to the adsorption of lead by an activated carbonChemical Engineering Research and Design, 2016
- Free chlorine formation during electrochemical regeneration of a graphite intercalation compound adsorbent used for wastewater treatmentJournal of Applied Electrochemistry, 2015
- Photocatalytic degradation of textile dyestuffs using TiO2 nanotubes prepared by sonoelectrochemical methodApplied Surface Science, 2014
- Coagulation-flocculation of azo dye Acid Orange 7 with green refined laterite soilChemical Engineering Journal, 2014
- A new linear form analysis of Redlich–Peterson isotherm equation for the adsorptions of dyesChemical Engineering Journal, 2010
- Characteristics of Elovich equation used for the analysis of adsorption kinetics in dye-chitosan systemsChemical Engineering Journal, 2009