Abstract
This paper proposed a current-source input and voltage source output converter for wide range variation of load power. The challenge of constant current conversion is the input voltage tends to diverge to the highest at reduced load condition and tends to lowest at increased load condition, as the current cannot be varied abruptly. The proposed converter features regulated input characteristics and output voltage from rated power to no-load, provides a current-freewheel branch composed of MOSFET and transformer for the constant input current, which solves the problem of input voltage disperse to the highest; besides, the energy stored in the floating capacitor is used as transient energy for the load power increase, which avoids the input voltage disperse to 0V as it changes from no-load to full-load, and the energy of the floating capacitor is derived from the transformer magnetic reset. Furthermore, the typically constant current supply systems operate at low currents and the power is limited by the input voltage, so the proposed converter employs two capacitors charging in series and discharging interleaved, which improved the input voltage level and reduced the output filter inductance. Moreover, the lagged freewheel switches realizes zero-voltage turn-on, which is helpful for efficiency. A prototype with 2A dc input and 250V/530W output is built to verify the feasibility of the proposed topology.
Funding Information
  • National Natural Science Foundation of China (52407204)
  • Postdoctoral Science Foundation of China (2024M750873)

This publication has 35 references indexed in Scilit: