Numerical Study of Inlet and Geometry Effects on Discharge Coefficients for Liquid Jet Emanating From a Plain-Orifice Atomizer
Author:
Open Access
- 1 September 2002
- journal article
- Published by Oxford University Press (OUP) in Journal of Mechanics
- Vol. 18 (3) , 153-161
Abstract
A computational model for flow in a plain-orifice atomizer is established to examine the inlet and geometry effects on discharge coefficients. The volume of fluid (VOF) method with finite volume formulation was employed to capture the liquid/gas interface. A continuum Surface Force (CSF) model was adopted to model the surface tension. The body-fitted coordinate system was used to facilitate the configuration of the atomizer. The influences of the inlet chamfer angle, the orifice length/diameter ratio, the Reynolds number, and the inlet turbulence intensity are analyzed. It is found that the optimum discharge coefficient occurs at a chamfer angle of about 50°. The discharge coefficient at first increases with the increase in the orifice length/diameter ratio and then it decreases. The discharge coefficient increases with the increase in the Reynolds number up to Re = 40000, after which it remains sensibly constant. The influence of the inlet turbulence intensity on discharge coefficient is not significant, especially for a longer orifice.Keywords
This publication has 26 references indexed in Scilit:
- DETAILED INVESTIGATION OF THE INFLUENCE OF FLUID VISCOSITY ON THE PERFORMANCE CHARACTERISTICS OF PLAIN-ORIFICE EFFERVESCENT ATOMIZERSAtomization and Sprays, 2001
- Parametric Study of Simplex Fuel Nozzle Internal Flow and PerformanceAIAA Journal, 2000
- Computational and Experimental Study of Liquid Sheet Emanating from Simplex Fuel NozzleAIAA Journal, 1998
- EFFECT OF CAVITATION ON FLOW AND TURBULENCE IN PLAIN ORIFICES FOR HIGH-SPEED ATOMIZATIONAtomization and Sprays, 1995
- EFFECTS OF INITIAL FLOW CONDITIONS ON PRIMARY BREAKUP OF NONTURBULENT AND TURBULENT ROUND LIQUID JETSAtomization and Sprays, 1995
- A continuum method for modeling surface tensionJournal of Computational Physics, 1992
- A consistently formulated QUICK scheme for fast and stable convergence using finite-volume iterative calculation proceduresJournal of Computational Physics, 1992
- Numerical Methods for Viscous Flows With Moving BoundariesApplied Mechanics Reviews, 1989
- The numerical computation of turbulent flowsComputer Methods in Applied Mechanics and Engineering, 1974
- Numerical Calculation of Time-Dependent Viscous Incompressible Flow of Fluid with Free SurfaceThe Physics of Fluids, 1965