Foam-Metal Casing Treatment on an Axial Flow Compressor: Stability Improvement and Noise Reduction
- 7 September 2021
- journal article
- research article
- Published by Wiley in Journal of Turbomachinery
- Vol. 144 (1)
Abstract
A set of foam metal casing treatment (FMCT) has been investigated to assess the stability improvement and noise reduction on an axial compressor. Three FMCTs with different PPI (Pores Per Inch), 20, 35, and 50, are tested experimentally. Two installation locations of foam metal in the casing are also considered and investigated. At location 1, it is found that the FMCT improves the stall margin by 5.4–8.7%, and the attenuation of compressor noise is up to 5 dB. At location 2, the stall margin is extended by 22.2–37.1% but increasing the noise mostly. Besides, foam metal at location 1 causes less efficiency loss than that at location 2. Based on the analysis in near-casing pressure distribution, spanwise performance comparison, and stall process, the mechanism of the FMCT for enhancing the compressor stability is also discussed.Keywords
Funding Information
- National Natural Science Foundation of China (51906004)
This publication has 21 references indexed in Scilit:
- Enhancing the Stability of Subsonic Compressors Using Casing GroovesJournal of Turbomachinery, 2010
- Spike-Type Compressor Stall Inception, Detection, and ControlAnnual Review of Fluid Mechanics, 2010
- Low-Speed Fan Noise Attenuation from a Foam-Metal LinerJournal of Aircraft, 2009
- COMPRESSIONSYSTEMSTABILITY ANDACTIVECONTROLAnnual Review of Fluid Mechanics, 2001
- Computational Study of Rotating-Stall Inception in Axial CompressorsJournal of Propulsion and Power, 1997
- Stall Inception in Axial Flow CompressorsJournal of Turbomachinery, 1993
- Stall Inception in Axial CompressorsJournal of Turbomachinery, 1990
- Structure of Tip Clearance Flow in an Isolated Axial Compressor RotorJournal of Turbomachinery, 1989
- Flow Phenomena in Compressor Casing TreatmentJournal of Engineering for Gas Turbines and Power, 1984
- Stall Margin Improvement by Casing Treatment—Its Mechanism and EffectivenessJournal of Engineering for Power, 1977