A Novel On-Chip Diagnostic Method to Measure Burn Rates of Energetic Materials
- 1 January 2006
- journal article
- research article
- Published by Taylor & Francis in Journal of Energetic Materials
- Vol. 24 (1) , 1-15
Abstract
A novel on-chip diagnostic method has been developed to measure burn rates of energetic materials patterned on a 1 inch × 3 inch glass chip. The method is based on time-varying resistance (TVR) of a sputter-coated thin platinum (Pt) film, in which resistance of the film changes because of the propagation of ignition of the nanoenergetic material over it. The corresponding voltage differential is captured by a high-speed data acquisition system (1.25 × 106 samples/s). We have measured burn rates as high as 504 m/s for thermites of copper oxide (CuO)/aluminum (Al) and 155 m/s for bismuth oxide (Bi2O3)/Al nanoparticles using this method. We have provided an explanation for the change of resistance upon ignition, based on the microstructural characterization and energy dispersive spectroscopy.Keywords
This publication has 7 references indexed in Scilit:
- Laser ignition of nanocomposite thermitesCombustion and Flame, 2004
- The chemistry of self-propagating high-temperature synthesisJournal of Materials Chemistry, 2004
- Aero-Sol−Gel Synthesis of Nanoporous Iron-Oxide Particles: A Potential Oxidizer for Nanoenergetic MaterialsChemistry of Materials, 2004
- SHOCK WAVE/GEOPHYSICAL AND MEDICAL APPLICATIONSAnnual Review of Fluid Mechanics, 2004
- Effect of intermixing on self-propagating exothermic reactions in Al/Ni nanolaminate foilsJournal of Applied Physics, 2000
- Combustion synthesis of advanced materials: Part I. Reaction parametersProgress in Materials Science, 1995
- Self-propagating exothermic reactions: The synthesis of high-temperature materials by combustionMaterials Science Reports, 1989