The Enhancement of Lump Coal Percentage by High-Pressure Pulsed Hydraulic Fracturing for Sustainable Development of Coal Mines
Open Access
- 14 May 2019
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 11 (10) , 2731
Abstract
The enhancement of lump coal percentage (LCP) is of great significance for most aging mines to achieve the production reduction and quality improvement. In order to enhance the LCP of hard coal seam in fully mechanized mining face and prolong the service life of aging mines, this paper puts forward the technological path of LCP enhancement using high-pressure pulsed hydraulic fracturing (HPPHF) based on the detailed analysis of the main factors controlling LCP. By analyzing the correlation between coal fracturing and LCP, the enhancement mechanism of LCP through HPPHF was concluded. Using the extended finite element method, a fluid–solid coupling numerical model of high-pressure pulsed water injection into coal seam was established, and effects of the fracturing method, pulse amplitude, pulse frequency, and water injection pressure on fracturing performance were assessed. Simulation results demonstrate that HPPHF can effectively reduce the required maximum pressure in fracturing, thus providing a higher percentage of coal lumps with lower energy consumption through the repeated pulsed loading of coal masses. Variations in pulsed pressure amplitude and frequency, as well as water injection pressure were positively correlated with fracturing performance. By their effect on the fracturing performance, we found that water injection pressure had the greatest influence, and the pulse amplitude and frequency had similar effects. At the same time, “high amplitude-high frequency” and “high amplitude-low frequency” had characteristics of short initiation time, large initiation pressure, but small fracture width, while “low amplitude-high frequency” and “low amplitude-low frequency” had characteristics of slow initiation speed, low initiation pressure, but large fracture width. Through the field test results in the fully mechanized mining face of Shichangwan Coal Mine, it was found that LCP with a diameter range of 13–100 mm was significantly enhanced by HPPHF. The present study is considered quite instrumental in providing a theoretical foundation for enhancing the LCP of hard coal seams and the sustainable development of coal mine enterprises.Keywords
Funding Information
- the Fundamental Research Funds for the Central Universities (2017XKZD13)
This publication has 20 references indexed in Scilit:
- Shaft failure characteristics and the control effects of backfill body compression ratio at ultra-contiguous coal seams miningEnvironmental Earth Sciences, 2018
- Ecological coal mining based dynamic equilibrium strategy to reduce pollution emissions and energy consumptionJournal of Cleaner Production, 2017
- Respirable coal mine dust characteristics in samples collected in central and northern AppalachiaInternational Journal of Coal Geology, 2017
- Clean coal technology for removal dust using moving granular bed filterEnergy, 2017
- Experimental research of particle size and size dispersity on the explosibility characteristics of coal dustPowder Technology, 2016
- A new technique for preventing and controlling coal and gas outburst hazard with pulse hydraulic fracturing: a case study in Yuwu coal mine, ChinaNatural Hazards, 2014
- Inflationary effect of coal price change on the Chinese economyApplied Energy, 2014
- Optimization of the fully-mechanized stoping face length and efficiency in a coal mineJournal of Mining Science, 2013
- Assessment of Stimulated Area Growth During High-Pressure Hydraulic Stimulation of Fractured Subsurface ReservoirTransport in Porous Media, 2006
- Cutting efficiency and life of rock-cutting picksMining Science and Technology, 1985