A study to investigate the compressive strength and flow of alkali activated slag mortar using two curing regimes
Open Access
- 1 August 2025
- conference paper
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1530 (1)
Abstract
This research investigates the potential for producing more environmentally friendly mortars by replacing cement with Ground Granulated Blast Furnace Slag (GGBS). The study examines the influence of key factors on the properties of GGBS-based mortar activated using sodium silicate (SS) and sodium hydroxide (NaOH). Specifically, it explores: (1) the effect of different SS types—base and neutral type; (2) the sodium oxide (Na₂O) content, derived from both activators, with concentrations of 12% and 15%; (3) the impact of curing methods, including ambient temperature curing and full water immersion (submerged); and (4) the role of the water-to-binder (w/b) ratio, assessed at 43% and 48%. The performance of GGBS mortars was evaluated in terms of compressive strength and flowability. The results showed no significant difference between the two SS types; however, the base SS was recommended due to its lower NaOH content to reach the same Na₂O content, which leads to reduced generated heat when preparing the solution. Additionally, a 12% Na₂O concentration yielded higher compressive strength and enhanced flowability. While increasing the w/b ratio improved flowability, it had a detrimental effect on compressive strength. Furthermore, submerged curing significantly reduced compressive strength compared to ambient curing.Keywords
This publication has 13 references indexed in Scilit:
- The impact of waste brick and geo-cement aggregates as sand replacement on the mechanical and durability properties of alkali–activated mortar compositesResults in Engineering, 2024
- Properties of alkali-activated slag mortar and prediction of its compressive strengthAin Shams Engineering Journal, 2023
- A systematic review on the impact of cement industries on the natural environmentEnvironmental Science and Pollution Research, 2022
- Potential applications of geopolymer concrete in construction: A reviewCase Studies in Construction Materials, 2021
- Advances in geopolymer materials: A comprehensive reviewJournal of Traffic and Transportation Engineering (English Edition), 2021
- Challenges against CO2 abatement strategies in cement industry: A reviewJournal of Environmental Sciences, 2021
- A critical review on application of alkali activated slag as a sustainable composite binderCase Studies in Construction Materials, 2019
- Cement plant emissions and health effects in the general population: a systematic reviewChemosphere, 2019
- One-part alkali-activated materials: A reviewCement and Concrete Research, 2018
- The effects of silica modulus and aging on compressive strength of pumice-based geopolymer compositesConstruction and Building Materials, 2015