Subassemblage Cyclic Loading Tests of Buckling-Restrained Braced RC Frames with Unconstrained Gusset Connections
- 1 February 2016
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 142 (2)
Abstract
An unconstrained gusset connection for buckling restrained braces in reinforced concrete frame structures is proposed and tested as an effort to mitigate the complicated and usually harmful interactions between the steel gusset plate and the adjoining reinforced concrete column. Local damage control incorporating the rearrangement of beam flexural strength is also proposed to enhance the reliability of the gusset connection by moving the potential plastic hinge of the beam away from the connection region. Two different connecting methods, one with posttensioned steel rods and the other embedded stud groups, were considered. The results of the cyclic loading tests on reinforced concrete (RC) beam-gusset connection subassemblies confirmed that both connecting methods are available as long as the local damage control is implemented, which is not only helpful in eliminating the unfavorable deformation loss at the connection, but more importantly, can prevent the buckling restrained braces (BRBs) from ...Keywords
This publication has 6 references indexed in Scilit:
- APPLICATIONS OF SEISMIC RETROFITTING METHOD BY FRAMED STEEL BRACE SYSTEM CONCENTRICALLY JOINTED WITH ANCHORSAIJ Journal of Technology and Design, 2012
- SEISMIC RETROFITTING STEEL BRACE WHICH USES POST-INSTALLED ANCHOR TOGETHER WITH EPOXY RESIN FOR RC STRUCTURES WITH LOW-STRENGTH CONCRETEJournal of Structural and Construction Engineering (Transactions of AIJ), 2011
- Cyclic Testing of a Buckling Restrained Braced Frame with Unconstrained Gusset ConnectionsJournal of Structural Engineering, 2009
- Experimental Evaluation of Cyclically Loaded Reduced Beam Section Moment ConnectionsJournal of Structural Engineering, 2002
- Coefficient of Friction for Steel on Concrete at High Normal StressJournal of Materials in Civil Engineering, 1990
- Friction Coefficient of Steel on Concrete or GroutJournal of Structural Engineering, 1985