Growth of adsorbed additive layer for further friction reduction
Authors:
- 6 April 2018
- journal article
- conference paper
- Published by Wiley in Lubrication Science
- Vol. 31 (5) , 171-178
Abstract
Boundary lubrication is one of the most interesting topics in the field of tribology, and a lot of studies have been conducted from the past for understanding the behaviour of boundary lubrication films. General boundary lubrication films are formed by the adsorption of additives mixed into lubricant, and then the tribological performances are drastically improved in many cases. However, there is still room for discussion on the “actual” behaviour of adsorbed additive layer in the tribological condition, that is, under high pressure and/or with external forces. This paper showed the “growing” behaviour of an adsorbed additive layer onto metal surface due to high pressure by means of neutron reflectometry in conjunction with the result obtained through cross‐sectional imaging by frequency‐modulation atomic force microscopy. In addition, the nanotribological study using atomic force microscopy with a colloidal probe showed that the coefficient of friction in the pre‐scratched area was lower than that in the non‐scratched area and that the reduction ratio for lubricant with additive was higher than that for lubricant without additive. This result indicates that growth of the adsorbed additive layer contributed more greatly to a reduction in the coefficient of friction.Keywords
Funding Information
- JSPS KAKENHI (JP25289025)
- JST PRESTO (JPMJPR13C9)
This publication has 33 references indexed in Scilit:
- Chemical Reactivity of Triphenyl Phosphorothionate (TPPT) with Iron: An ATR/FT-IR and XPS InvestigationThe Journal of Physical Chemistry C, 2010
- Development of new in situ observation system for dynamic study of lubricant molecules on metal friction surfaces by two-dimensional fast-imaging Fourier-transform infrared-attenuated total reflection spectrometerReview of Scientific Instruments, 2008
- In-Contact IR Spectroscopy of Hydrocarbon LubricantsTribology Letters, 2005
- Combined in situ (ATR FT-IR) and ex situ (XPS) Study of the ZnDTP-Iron Surface InteractionTribology Letters, 2003
- Growth of Tribological Films: In Situ Characterization Based on Attenuated Total Reflection Infrared SpectroscopyLangmuir, 2002
- Surface chemistry in tribologyProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2002
- The Effect of Concentration, Solvent, and Temperature on Aggregation of a Commercial Calcium Sulfonate Additive as Studied by FTIR and Light Scattering TechniquesTribology Transactions, 1997
- Lubricant-derived tribochemical films—An infra-red spectroscopic studyTribology International, 1992
- Tribochemical and Thermochemical Reactions of Stearic Acid on Copper Surfaces Studied by Infrared MicrospectroscopyTribology Transactions, 1992
- Boundary layer lubrication: monolayer or multilayerWear, 1969