Study on Interaction Mechanism between the Shaped Charge Jet and Thick Moving Target
- 12 June 2019
- journal article
- research article
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 44 (8) , 1033-1048
Abstract
The traditional anti‐aircraft and anti‐missile warhead mainly hit the target by fragments or MEFPs. However, these killing elements are only effective for thin‐shell ammunition (10–30 mm), but not for thick‐shell ammunition (>100 mm). This paper proposes an attacking method towards thick moving target by shaped charge jet. Through the analysis of the whole penetrating process between the shaped charge jet and the thick moving target, the paper divides the process into two stages: undisturbed jet penetration and disturbed jet penetration. Based on virtual origin theory, this paper carried out detailed theoretical analysis for each stage and established theory algorithms of changes of cavity when shaped charge jet penetrates the thick moving target, penetration depth of undistributed jet, the lateral velocity of jet and penetration depth contributed by distributed jet. Since the current experimental method cannot accurately analyze the dynamic penetration process of each jet element, in order to verify the theoretical model, a diameter of 66 mm shaped charge was designed, and through the LS‐DYNA software, the jet penetrates steel target with the transverse velocity of 0∼600 m/s was calculated. The study also carried out detailed analysis of the jet tip and tail velocity, the shape of the penetration hole, the lateral velocity of the disturbed jet and the total depth of penetration. At the same time, we combine with the experimental data of E. Marmor et al.[22], to compare with the theoretical results. The calculations are in good agreement with the E. Marmor's experimental datas. The results indicate that shaped charge warhead is an effective method to tackle high speed thick moving target. The theoretical model established in this paper can effectively guide the structural design of the warhead.Keywords
Funding Information
- National Natural Science Foundation of China (11602110)
This publication has 13 references indexed in Scilit:
- Theoretical analysis of the disturbance of shaped charge jet penetrating a woven fabric rubber composite armorInternational Journal of Impact Engineering, 2014
- Optical techniques for the investigation of the ballistic impact of thin platesInternational Journal of Impact Engineering, 2011
- On the main mechanisms for defeating AP projectiles, long rods and shaped charge jetsInternational Journal of Impact Engineering, 2009
- Effect of thin oblique moving plates on long rod projectiles: A reverse impact studyInternational Journal of Impact Engineering, 2006
- The shaped charge jet interaction with finite thickness targetsInternational Journal of Impact Engineering, 2001
- Hydrodynamic theory of glancing impactJournal of Fluid Mechanics, 1990
- Effect of Moving Plate on Jet‐PenetrationPropellants, Explosives, Pyrotechnics, 1989
- Interaction of a Metallic Jet with a Moving TargetPropellants, Explosives, Pyrotechnics, 1988
- Experimental Verification of the Theory of Jet Formation by Charges with Lined Conical CavitiesJournal of Applied Physics, 1952
- Theory of Jet Formation by Charges with Lined Conical CavitiesJournal of Applied Physics, 1952