Optimum parametrization of the soil conservation service (SCS) method for simulating the hydrological response in arid basins
Open Access
- 11 June 2022
- journal article
- research article
- Published by Taylor & Francis in Geomatics, Natural Hazards and Risk
- Vol. 13 (1) , 1482-1509
Abstract
The use of the soil conservation service (SCS) curve number (CN) model for estimation of the rainfall excess and the SCS-unit hydrograph (UH) model are common tools for flood studies in arid regions. In this research, we are investigating the capability of these models to simulate flood events in the arid region under the common parametrization provided by the SCS model (SCS-CN, the initial abstraction ratio, λ, and UH theory) and the optimum parameterization for best simulating the hydrologic response. A case study is performed in Al-Lith basin in the west of Saudi Arabia (SA). The study simulates measured rainfall-runoff events in the area using seven scenarios (various SCS-CN estimation methods: least-squares method (CNLSM), asymptotic fitting method (CN∞), SCS-CN tables (CNdesign), and antecedent moisture content CN (CNI, CNII, and CNIII), λ = 0.2 and 0.01, and SCS-UH and UH derived from streamflow data) and a comparison is made between the observations and model results under the common parameterization of the SCS model and parameterization estimated from the Saudi arid environment. The comparison between simulated and observed peak flow and runoff volume of the studied events shows high scatter which is a common feature in arid regions due to the inherent uncertainties in the hydrological processes which are not yet resolved due to the lack of detailed measurements of the rainfall-runoff processes. Statistical analysis showed that λ = 0.01 provides a minimum root mean square error (RMSE) in the peak flow (24.8 m3/s) and the runoff volume (0.31 million m3) with CNLSM obtained by LSM. CN∞ is bad to simulate the hydrologic response. The SCS-CN Tables cannot be used for hydrological simulation. They can rather be used for the design purposes of mitigation structures.Keywords
Funding Information
- Deanship of Scientific Research (DSR) at King Abdulaziz University, Jeddah (RG-1-123-39)
This publication has 35 references indexed in Scilit:
- Flash flood hazard mapping based on quantitative hydrology, geomorphology and GIS techniques (case study of Wadi Al Lith, Saudi Arabia)Arabian Journal of Geosciences, 2013
- Identification of the SCS-CN Parameter Spatial Distribution Using Rainfall-Runoff Data in Heterogeneous WatershedsWater Resources Management, 2012
- SCS-CN parameter determination using rainfall-runoff data in heterogeneous watersheds – the two-CN system approachHydrology and Earth System Sciences, 2012
- Discussion of “Modifications to SCS-CN Method for Long-Term Hydrologic Simulation” by K. Geetha, S. K. Mishra, T. I. Eldho, A. K. Rastogi, and R. P. PandeyJournal of Irrigation and Drainage Engineering, 2010
- Investigation of the direct runoff generation mechanism for the analysis of the SCS-CN method applicability to a partial area experimental watershedHydrology and Earth System Sciences, 2009
- Spatial-temporal rainfall modelling for flood risk estimationStochastic Environmental Research and Risk Assessment, 2005
- CURVE NUMBER HYDROLOGY IN WATER QUALITY MODELING: USES, ABUSES, AND FUTURE DIRECTIONSJawra Journal of the American Water Resources Association, 2005
- Determination of Watershed Curve Number Using Derived DistributionsJournal of Irrigation and Drainage Engineering, 1997
- Asymptotic Determination of Runoff Curve Numbers from DataJournal of Irrigation and Drainage Engineering, 1993
- Runoff Probability, Storm Depth, and Curve NumbersJournal of Irrigation and Drainage Engineering, 1985