Ultraviolet optical properties of aluminum fluoride thin films deposited by atomic layer deposition
Authors:
- 13 November 2015
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 34 (1) , 01A120
Abstract
Aluminum fluoride (AlF3) is a low refractive index material with promising optical applications for ultraviolet (UV) wavelengths. An atomic layer deposition process using trimethylaluminum and anhydrous hydrogen fluoride has been developed for the deposition of AlF3 at substrate temperatures between 100 and 200 °C. This low temperature process has resulted in thin films with UV-optical properties that have been characterized by ellipsometric and reflection/transmission measurements at wavelengths down to 200 nm. The optical loss for 93 nm thick films deposited at 100 °C was measured to be less than 0.2% from visible wavelengths down to 200 nm, and additional microstructural characterization demonstrates that the films are amorphous with moderate tensile stress of 42–105 MPa as deposited on silicon substrates. X-ray photoelectron spectroscopy analysis shows no signature of residual aluminum oxide components making these films good candidates for a variety of applications at even shorter UV wavelengths.Keywords
Funding Information
- National Aeronautics and Space Administration
This publication has 25 references indexed in Scilit:
- Effects of substrate temperatures and deposition rates on properties of aluminum fluoride thin films in deep-ultraviolet regionApplied Optics, 2012
- Experimental determination of optical constants of MgF2 and AlF3 thin films in the vacuum ultra-violet wavelength region (60–124nm), and its application to optical designsOptics Communications, 2010
- Characterization of AlF_3 thin films at 193 nm by thermal evaporationApplied Optics, 2005
- Vacuum-ultraviolet refractive index of LiF and MgF_2 in the temperature range 80–300 KJournal of the Optical Society of America, 1983
- Optical transitions in disordered thin films of the ionic compounds MgF_2 and AlF_3 as a function of their conditions of preparationApplied Optics, 1977
- Effect of Deposition Rate and Substrate Temperature on the Vacuum Ultraviolet Reflectance of MgF_2- and LiF-Overcoated Aluminum MirrorsApplied Optics, 1972
- Reflectance of Aluminum Overcoated with MgF_2 and LiF in the Wavelength Region from 1600 Å to 300 Å at Various Angles of IncidenceApplied Optics, 1971
- Vacuum evaporated films of aluminum fluorideThin Solid Films, 1970
- Preparation of Mirror Coatings for the Vacuum Ultraviolet in a 2-m EvaporatorApplied Optics, 1969
- Effects of a Simulated High-Energy Space Environment on the Ultraviolet Transmittance of Optical Materials between 1050 Å and 3000 ÅApplied Optics, 1966