Designing of a New Type Air-Water Cooled Photovoltaic Collector
Open Access
- 20 March 2020
- journal article
- research article
- Published by University North in Tehnički glasnik
- Vol. 14 (1) , 41-45
Abstract
The importance of photovoltaic-thermal (PV / T) collector systems in renewable energy technologies is increasing for combined hybrid electrical heat applications. The efficiency of photovoltaic (PV) systems varies between 5-20%. On average, 15% of the solar radiation coming to the PV panel surface is converted to electrical energy and the remainder is lost. In this study, a PV/T collector was designed using two different fluids simultaneously and its efficiency was calculated numerically. PV/T collector systems are specifically designed for agricultural production and their advantages are discussed. In this study, numerical calculations of PV/T collector with a different design have been made. The results were compared with reference to another experimental study. Two different working fluids (air and water) were used in the calculations. The system where air is used as working fluid is called Mode 1 and the system where water is used is called Mode 2. It is aimed to achieve high heat transfer by using water pipes, air ducts and fins placed under PV panels. In this way, it is aimed to produce a more stable hot air and water. In addition, in order to investigate the effect of flow on the yield, different flow rates were calculated. As a result of the theoretical analyses and calculations made in consideration of literature, the total efficiencies of air flow mode (Mode 1) were calculated as 43.2%, 46,2% and 48.7% at 0.0067 kg/s, 0.0072 kg/s and 0.0077 kg/s mass flow rates, respectively. For water flow mode (Mode 2), these values computed as 52.81%, 53.83% and 55.04% at 0.023 kg/s, 0.036 kg/s and 0.054 kg/s mass flow rates, respectively. It was found that PV / T collector efficiency increased with increasing end flow. Designed collector system is preferable in terms of effective use of energy and it can be easily applicable in processes such as hot air-water preparation, drying and greenhouse heating.Keywords
This publication has 29 references indexed in Scilit:
- Experimental investigation of the effects of using metal-oxides/water nanofluids on a photovoltaic thermal system (PVT) from energy and exergy viewpointsEnergy, 2017
- Energetic, exergetic and economic analysis of an innovative Solar CombiSystem (SCS) producing thermal and electric energies: Application in residential and tertiary householdsEnergy Conversion and Management, 2017
- Design and development of a reflective membrane for a novel Building Integrated Concentrating Photovoltaic (BICPV) ‘Smart Window’ systemApplied Energy, 2016
- Exergetic analysis of a new design photovoltaic and thermal (PV/T) SystemEnvironmental Progress & Sustainable Energy, 2015
- Concentration photovoltaic–thermal energy co-generation system using nanofluids for cooling and heatingEnergy Conversion and Management, 2014
- Cooling of a photovoltaic module with temperature controlled solar collectorEnergy and Buildings, 2014
- Performance analysis of photovoltaic thermal (PVT) water collectorsEnergy Conversion and Management, 2014
- Efficiencies and improvement potential of building integrated photovoltaic thermal (BIPVT) systemEnergy Conversion and Management, 2014
- Hybrid PV/T solar systems for domestic hot water and electricity productionEnergy Conversion and Management, 2006
- Hybrid photovoltaic and thermal solar-collector designed for natural circulation of waterApplied Energy, 2006