SolarSyngas: Results from a virtual institute developing materials and key components for solar thermochemical fuel production
- 1 January 2016
- conference paper
- Published by AIP Publishing
- Vol. 1734 (1) , 120007
Abstract
The Helmholtz Virtual Institute (VI) SolarSynGas brings together expertise from solar energy research and materials science to develop metal oxide based redox materials and to integrate them in a suitable way into related process technologies for two-step thermochemical production of hydrogen and carbon monoxide from water and CO2. One of the foci of experimental investigation was exploring the impact of doping on the feasibility of ceria-based materials – mainly by Zr-doping. The results indicate that a certain Zr-content enhances the reducibility and therefore the splitting performance. Increasing the Zr-content to x = 0.15 improved the specific CO2-splitting performance by 50% compared to pure ceria. This finding agrees with theoretical studies attributing the improvements to lattice modification caused by the introduction of Zr4+. Thermogravimetric relaxation experiments and equilibrium oxygen isotope exchange experiments with subsequent depth profiling analysis were carried out on ceria. As a result the reduction reaction of even dense samples of pure ceria with a grain size of about 20 µm is surface reaction controlled. The structure of the derived expression for the apparent activation energy suggests that the chemical surface exchange coefficient should show only a very weak dependence on temperature for ceria doped with lower valence cations. A solar receiver reactor exhibiting a foam-type reticulated porous ceramics made of ceria was tested. It could be shown that applying dual-scale porosity to those foams with mm-size pores for effective radiative heat transfer during reduction and μm-size pores within its struts for enhanced kinetics during oxidation allows enhancing the performance of the reactor significantly. Also a particle process concept applying solid-solid heat recovery from redox particles in a high temperature solar thermochemical process was analysed that uses ceramic spheres as solid heat transfer medium. This concept can be implemented into any particle reactor and offers sufficiently high heat recovery rates and thus high overall system efficiencies. A detailed model to calculate the performance of the concept in consideration of temperature dependent material data and several other influencing factors was developed. It was found that the molar flow ratio needs to be optimized regarding the contact time and the heat recovery rate only increases slightly over a contact time of τ=10s. The system reaches a heat recovery rate over 70% in case of six stages, connected in a quasi-counter-current principle.Keywords
This publication has 8 references indexed in Scilit:
- Demonstration of the Entire Production Chain to Renewable Kerosene via Solar Thermochemical Splitting of H2O and CO2Energy & Fuels, 2015
- Concept analysis of an indirect particle-based redox process for solar-driven H2O/CO2 splittingSolar Energy, 2015
- Ceria Doped with Zirconium and Lanthanide Oxides to Enhance Solar Thermochemical Production of FuelsThe Journal of Physical Chemistry C, 2015
- A review on solar thermal syngas production via redox pair-based water/carbon dioxide splitting thermochemical cyclesRenewable and Sustainable Energy Reviews, 2015
- Surface controlled reduction kinetics of nominally undoped polycrystalline CeO 2Physical Chemistry Chemical Physics, 2015
- Heat recovery concept for thermochemical processes using a solid heat transfer mediumApplied Thermal Engineering, 2014
- Morphological Characterization and Effective Thermal Conductivity of Dual-Scale Reticulated Porous StructuresMaterials, 2014
- Diffusion of Oxygen in Ceria at Elevated Temperatures and Its Application to H2O/CO2 Splitting Thermochemical Redox CyclesThe Journal of Physical Chemistry C, 2014