An Integrated Sensor Array for Water Quality Monitoring
Open Access
- 1 January 2025
- journal article
- Published by Institution of Engineering and Technology (IET) in IET Science, Measurement & Technology
- Vol. 19 (1)
Abstract
Four important quantities in water quality monitoring are temperature, specific electrical conductivity (EC), total dissolved solids (TDS), and pH. In this paper, three sensors for precisely detecting these parameters were designed and fabricated in one structure. Spiral electrodes were made as temperature sensors and circular toothed electrodes were made as EC sensors. The pH sensor comprises two electrodes: the reference electrode (Ag/AgCl) and the working electrode (carbon black/highly porous polyaniline). The response time of the temperature sensor is 13.2 s, and the stability of the sensor is −0.031, and the sensitivity of the sensor is 0.003 . The response time of the pH sensor was reported as 136.2 and the sensor's sensitivity was 8.8 in the pH range of 4 to 10. Also, the best excitation frequency of 30 kHz and the best reference resistance of 1 were measured in the range of 100 to 2000 and the sensitivity of the EC sensor is . TDS was also calculated from the specific electrical conductivity using the conversion factor of 0.66 . Considering the electrical output of all sensors, a circuit was designed and built to receive their information. Operational amplifiers with different functions were used to create the reading circuit.Keywords
This publication has 51 references indexed in Scilit:
- Synthesis and electrochemical testing of novel doped polyaniline and biomass‐derived carbon‐based composite for supercapacitorsPolymers for Advanced Technologies, 2024
- Evaluation of groundwater for drinking and irrigation applications concerning physicochemical and ionic parameters through multiple indexing approach: a case study around the industrial zone, Punjab, IndiaEnvironmental Geochemistry and Health, 2022
- The Interrelated Effect of Cations and Electrolyte pH on the Hydrogen Evolution Reaction on Gold Electrodes in Alkaline MediaAngewandte Chemie International Edition, 2021
- Polymerization of polyaniline under various concentrations of ammonium peroxydisulfate and hydrochloric acid by ultrasonic irradiationJournal of Applied Polymer Science, 2021
- Application of the Entropy Weighted Water Quality Index (EWQI) and the Pollution Index of Groundwater (PIG) to Assess Groundwater Quality for Drinking Purposes: A Case Study in a Rural Area of Telangana State, IndiaArchives of Environmental Contamination and Toxicology, 2021
- Electrical conductivity models in saturated porous media: A reviewEarth-Science Reviews, 2017
- A review on pH sensitive materials for sensors and detection methodsMicrosystem Technologies, 2017
- One‐Dimensional Nanostructured Polyaniline: Syntheses, Morphology Controlling, Formation Mechanisms, New Features, and ApplicationsAdvances in Polymer Technology, 2012
- New technology for the detection of pHJournal of Biochemical and Biophysical Methods, 2005
- Conductivity determined by a new sweat analyzer compared with chloride concentrations for the diagnosis of cystic fibrosisThe Journal of Pediatrics, 2005