A Technique for Determining p-n Junction Doping Profiles and Its Application to GaP
Authors:
- 1 August 1970
- journal article
- research article
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 41 (8) , 1182-1183
Abstract
A technique for determining p‐n junction doping profiles is presented. The doping level distribution is determined from a series of surface‐barrier capacitance (SBC) measurements, using the recently developed continuous impurity plotter (CIP) [J. A. Copeland, IEEE Trans. Electron Devices ED‐16, 445 (1969)]. The SBC measurements are made on an array of Schottky barrierdiodes deposited on a 3° angle‐lapped junction. The effective spatial resolution normal to the junction is 5 μ. This method yields a higher resolution than the four‐point probe method, requires less time than the step layer capacitance technique, and is more accurate than either method. In general, it is the most efficient approach to determining accurate junction impurity profiles presented to date. To illustrate the utility of the technique, an impurity doping profile is determined for an n‐on‐p liquid‐phase epitaxy GaP diode.Keywords
This publication has 2 references indexed in Scilit:
- A technique for directly plotting the inverse doping profile of semiconductor wafersIEEE Transactions on Electron Devices, 1969
- Preparation and Properties of Solution-Grown Epitaxial p—n Junctions in GaPJournal of Applied Physics, 1966