Blast coating method: New method of coating titanium surface with hydroxyapatite at room temperature
Authors:
- 1 January 1997
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research
- Vol. 38 (2) , 129-134
Abstract
When a titanium plate was blasted with hydroxyapatite [HAP; Ca10‐x (HPO4)x(PO4)6‐x(OH)2‐x] powder at room temperature using an ordinary sandblaster, the surface of the titanium plate was found to be coated with HAP homogeneously and completely. The coated layer was examined with energy dispersive X‐ray spectroscopy and X‐ray diffraction and was found to be the same as the HAP powder used with respect to composition and crystallographic structure. The coated HAP layer was tightly attached to the surface of the titanium plate, at least at the level of scanning electron microscopy. Interestingly, the HAP particles stuck together at room temperature as if they were sintered. The coating was stable against ultrasonication in water for at least 5 min, and it was difficult to remove by nail scratching. Thus, the bonding strength between the HAP powder and the titanium plate was much higher than that achieved with currently employed room temperature coating processes such as dipping, electrophoretic deposition, and electrochemical deposition. Therefore, the blast coating method is potentially valuable for the fabrication of useful biomaterials for hard tissue replacement. © 1997 John Wiley & Sons, Inc. J Biomed Mater Res (Appl Biomater) 38: 129–134, 1997Keywords
This publication has 16 references indexed in Scilit:
- Study of the surface characteristics of magnetron‐sputter calcium phosphate coatingsJournal of Biomedical Materials Research, 1994
- Effects of sandblasting and silica-coating procedures on pure titaniumJournal of Dentistry, 1994
- Features of calcium phosphate plasma‐sprayed coatings: An in vitro studyJournal of Biomedical Materials Research, 1994
- Thin hydroxyapatite coating produced by the ion beam dynamic mixing methodBiomaterials, 1994
- Application of magnetron sputtering for producing ceramic coatings on implant materialsClinical Oral Implants Research, 1993
- Bone tissue growth enhancement by calcium phosphate coatings on porous titanium alloys: The effect of shielding metal dissolution productBiomaterials, 1992
- Compositional variations in the surface and interface of calcium phosphate ceramic coatings on Ti and Ti-6Al-4V due to sintering and immersionBiomaterials, 1991
- Calcium phosphate ceramic coatings on porous titanium: effect of structure and composition on electrophoretic deposition, vacuum sintering and in vitro dissolutionBiomaterials, 1990
- Effects of Preparation Conditions in Aqueous Solution on Properties of HydroxyapatitesDental Materials Journal, 1990
- Hydroxyapatite CoatingsClinical Orthopaedics and Related Research, 1988