Poly (N-Isopropylacrylamide) Microgel-Based Assemblies for Organic Dye Removal from Water
Authors:
- 4 November 2011
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 3 (12) , 4714-4721
Abstract
Poly(N-isopropylacrylamide)-co-acrylic acid (pNIPAm-co-AAc) microgel assemblies (aggregates) were synthesized via polymerization of the cross-linker N,N′-methylenebisacrylamide (BIS) in the presence of microgels in solution. In this case, the microgels were entrapped in the polymerized cross-linker network. The aggregates were investigated for their ability to remove the organic, azo dye molecule 4-(2-hydroxy-1-napthylazo) benzenesulfonic acid sodium salt (Orange II) from water at both room and elevated temperatures. These results were compared with unaggregated microgels that were previously reported (Parasuraman, D.; Serpe, M. J. ACS. Appl. Mater. Interfaces2011, 3, 2732.). It was found that the removal efficiency increased at elevated temperature, most likely due to the thermoresponsive nature of the pNIPAm-based aggregates, which expel water of solvation and deswell at higher temperature and reswell when they are cooled back to room temperature. Furthermore, increasing the number of cycles the aggregates are heated and cooled enhanced the percent removal of the dye from water. We also evaluated the effect of increasing cross-linker concentration on the removal efficiency, where we found the removal efficiency to increase with increasing cross-linker concentration in the aggregates. The maximum removal efficiency reached by the microgel aggregates at elevated temperatures was calculated to be 73.1%. This enhanced uptake is due to the presence of larger internal volume between the microgels in the aggregates, which the individual microgels lack. Control studies reveal that the structure and hydrophobicity of the aggregates lead to the enhanced uptake efficiencies and is not due to the presence of BIS alone. We determined that aggregates leak 75.6% of the dye that was originally removed from solution. The removal of Orange II by the aggregates at room temperature was fit by a Langmuir sorption isotherm.Keywords
This publication has 65 references indexed in Scilit:
- Poly (N-Isopropylacrylamide) Microgels for Organic Dye Removal from WaterACS Applied Materials & Interfaces, 2011
- Decolorization of water and oil-soluble azo dyes by Lactobacillus acidophilus and Lactobacillus fermentumJournal of Industrial Microbiology and Biotechnology, 2009
- Combining Adsorption and Coagulation for the Treatment of Azo and Anthraquinone Dyes from Aqueous SolutionIndustrial & Engineering Chemistry Research, 2006
- Optimal decolorization efficiency of Reactive Red 239 by UV/TiO2 photocatalytic process coupled with response surface methodologyChemical Engineering Journal, 2005
- Removal of synthetic dyes from wastewaters: a reviewEnvironment International, 2004
- Performance evaluation of nanofiltration membranes for treatment of effluents containing reactive dye and saltDesalination, 2000
- Wastewater control and management in a leather tanning districtWater Science & Technology, 1999
- Evaluation of Membrane Filtration and Ozonation Processes for Treatment of Reactive-Dye WastewaterJournal of Environmental Engineering, 1998
- Use of Rhodamine WT to Facilitate Dilution and Analysis of Atrazine Samples in Short‐Term Transport StudiesJournal of Environmental Quality, 1997
- China clay as an adsorbent for dye house wastewatersEnvironmental Technology, 1992