Study of Shear and Extensional Viscosities of Biodegradable PBS/CO2 Solutions
Authors:
- Chul B. ParkChul B. Park
- Simon S. ParkSPSimon S. Park
- 1 March 2001
- journal article
- research article
- Published by SAGE Publications in Journal of Cellular Plastics
- Vol. 37 (2) , 109-148
Abstract
The purpose of this research is to study the pressure drop profiles of biodegradable polybutylene succinate (PBS)/CO2 solutions in a slit die and to measure the rheological properties of the solutions as a function of the blowing agent concentration. A slit die with four pressure transducers has been designed to describe the effects of shear rate, temperature, pressure, and gas content on the shear viscosity and extensional viscosity of the flowing PBS/CO2 solutions. The low shear rate viscosity of the pure polymer was measured using a cone and plate rheometer. Extensive experiments were conducted to investigate the polymer/gas solution viscosities at five different shear rates, three temperatures and five gas contents. Cross-Carreau model and generalized Arrhenius equation were used to describe the shear-viscosity behaviors of PBS/CO2 solutions. The extensional viscosity of solution was modeled based on Cogswell’s equation.Keywords
This publication has 24 references indexed in Scilit:
- Measurements and modeling of PS/supercritical CO2 solution viscositiesPolymer Engineering & Science, 1999
- Low density microcellular foam processing in extrusion using CO2Polymer Engineering & Science, 1998
- Effect of the pressure drop rate on cell nucleation in continuous processing of microcellular polymersPolymer Engineering & Science, 1995
- Transient Elongational Viscosities and Drawability of Polymer MeltsJournal of Rheology, 1989
- A Method for Viscosity Measurements of Concentrated Polymer Solutions in Volatile Solvents at Elevated TemperaturesJournal of Rheology, 1979
- Basic study of extrusion of polyethylene and polystyrene foamsJournal of Applied Polymer Science, 1979
- Converging flow and stretching flow: A compilationJournal of Non-Newtonian Fluid Mechanics, 1978
- An experimental technique for predicting foam processability and physical propertiesPolymer Engineering & Science, 1976
- A study of foam extrusion using a chemical blowing agentJournal of Applied Polymer Science, 1976
- Flow behavior of polyethylene melts containing dissolved gasesJournal of Polymer Science Part C: Polymer Symposia, 1971