Performance of Circular Concrete-Filled FRP-Grooved Steel Composite Tube Columns under Axial Compression
Open Access
Abstract
A new structure termed “concrete-filled FRP-grooved steel composite tube (CFGCT) column” is proposed, which is composed of a stress-released steel tube (i.e., grooved steel tube), fiber-reinforced polymer (FRP) and concrete. Axial load tests were carried out on twenty-four specimens to investigate the constraint effect of this structure. Three main experimental variables were considered: the steel tube thickness, the FRP type, and the FRP layer. The failure modes, stress-strain relationships and the effect of the main experimental variables were discussed. The stress-strain curves of this new structure are composed of an initial linear part, a nonlinear transition part, a strengthening part and a residual part. The test results demonstrate that the bearing capacity of the structure was improved, and that the mechanical mechanism of the structure was simplified due to the stress-released grooves. Based on the test results and previous studies, formulas for calculating the ultimate stress (fcu), ultimate strain (εcu), peak stress (fcc) and peak strain (εcc) were proposed. In addition, models for predicting the stress-strain curves of CFGCT columns were put forward, and the models could precisely simulate the stress-strain curve of this new composite structure. Hence, this study indicates that a structure composed of FRP and stress-released steel tube can effectively constrain concrete.Keywords
Funding Information
- National Natural Science Foundation of China (No. 51208262, 51778300)
- Jiangsu Key Research and Development Program (BE2020703)
- Jiangsu Qinglan Project (QL2020)
- Natural Science Foundation of Jiangsu Province (BK20191390)
- Six Talent Peaks Project in Jiangsu Province (JZ-017)
- Postgraduate research and practice innovation pragram of jiangsu province (KYCX21_0880)
This publication has 45 references indexed in Scilit:
- Experimental study on CFST members strengthened by CFRP composites under compressionJournal of Constructional Steel Research, 2012
- Axial load behavior and strength of tubed steel reinforced-concrete (SRC) stub columnsThin-Walled Structures, 2011
- Monotonic axial behavior and modelling of RC circular columns confined with CFRPEngineering Structures, 2010
- Behavior and strength of tubed RC stub columns under axial compressionJournal of Constructional Steel Research, 2010
- Effect of cross-sectional aspect ratio on the strength of CFRP-confined rectangular concrete columnsEngineering Structures, 2010
- Compressive Response of Concrete Confined with Steel Spirals and FRP CompositesJournal of Composite Materials, 2009
- Experimental and Parametric Study of Circular Short Columns Confined with CFRP CompositesJournal of Composites for Construction, 2009
- Analytical Model for FRP-Confined Circular Reinforced Concrete ColumnsJournal of Composites for Construction, 2008
- Hybrid FRP–concrete–steel tubular columns: Concept and behaviorConstruction and Building Materials, 2007
- Seismic behavior of confined square CFT columnsEngineering Structures, 2006