The use of southern Algeria dune sand in cellular lightweight concrete manufacturing: effect of lime and aluminium content on porosity, compressive strength and thermal conductivity of elaborated materials
Authors:
- 10 November 2016
- journal article
- research article
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- Vol. 22 (10) , 1273-1289
Abstract
The aim of this work is to promote the utilisation of southern Algeria dune sand for aerated concrete production without autoclaving process. This study has been undertaken to investigate the effect of hydrated lime and aluminium content on the porosity, especially the introduced porosity, compressive strength and thermal conductivity of cellular concretes elaborated from southern-Algeria dune sand, hydraulic binder (cement- hydrated lime) and aluminium powder as expansive agent. In this study, a series of 16 compositions of dune sand cellular concretes (DSCC) is manufactured with different percentages of cement, hydrated lime and aluminium powder. For each mix, a number of test specimens (40 × 40 × 160 mm3) was prepared and stored in the laboratory atmosphere at T = 20 ± 2 °C and HR = 70 ± 5% until the age of test. Experimental results reveal that the introduction of hydrated lime as partial substitution of cement tended: (i) to increase the total porosity of matrix; (ii) to reduce the rate of introduced porosity generated by the expansive agent and (iii) to diminish thermal conductivity as well as compressive strength of elaborated materials. It is shown that the expansion of DSCC paste decreases as a function of percentage of hydrated lime in the binder. Finally, southern Algeria dune sand can be utilised in producing lightweight cellular concrete. However, the use of cement as binder in manufacturing process is more recommended than the mix of cement and hydrated lime.Keywords
This publication has 25 references indexed in Scilit:
- The relationship between porosity and strength for porous concreteConstruction and Building Materials, 2011
- Thermal insulation enhancement in concretes by adding waste PET and rubber piecesConstruction and Building Materials, 2009
- The properties of concrete made with fine dune sandConstruction and Building Materials, 2007
- Effect of the addition of wood shavings on thermal conductivity of sand concretes: Experimental study and modellingConstruction and Building Materials, 2007
- Isothermal moisture properties of Clayey Cellular Concretes elaborated from clayey waste, cement and aluminium powderCement and Concrete Research, 2006
- Effects of waste PET bottles aggregate on the properties of concreteCement and Concrete Research, 2005
- Structure and properties of aerated concrete: a reviewCement and Concrete Composites, 2000
- Mechanical characterisation of filler sandcretes with rice husk ash additionsCement and Concrete Research, 2000
- Effective thermal conductivity of clayey aerated concrete in the dry state: experimental results and modellingJournal of Physics D: Applied Physics, 1999
- VI. The phenomena of rupture and flow in solidsPhilosophical Transactions of the Royal Society A, 1921