Design and development of a novel 4-DOF parallel kinematic coordinate measuring machine (CMM)
- 29 April 2019
- journal article
- research article
- Published by Taylor & Francis in International Journal of Computer Integrated Manufacturing
- Vol. 32 (8) , 750-760
Abstract
This paper presents the development of a new Coordinate Metrology Machine (CMM) using a novel four degrees of freedom parallel kinematics, namely C4, with three translations and one rotation about its X-axis. Design of the configuration, selection of the components, and detailing their interactions are among the most challenging tasks in this process. A detailed kinematic model of the designed configuration is derived, and the velocity Jacobian matrix for the moving platform and legs is calculated. Using the developed analytical approach, a novel graphical approach, and an experimental method the singularity and dexterity of the mechanism in the CMM’s workspace are defined. Following a systematic design improvement process, variety of design parameters and components’ details were analysed to select the optimum mechanism with the greatest dexterity and stiffness, and without singular points in a well-formed workspace. The final design is validated by construction of a fully functioning prototype of the mechanism, and experimentally testing variety of case studies. The results showed that the developed C4 mechanism presents a satisfactory level of dexterity and stiffness within a well-formed workspace as a CMM machine.Keywords
Funding Information
- specific grant from funding agencies in the public
This publication has 16 references indexed in Scilit:
- Design and Development of a High-Speed and High-Rotation Robot With Four Identical Arms and a Single PlatformJournal of Mechanisms and Robotics, 2015
- A comparison study of three degree-of-freedom parallel robotic machine tools with/without actuation redundancyInternational Journal of Computer Integrated Manufacturing, 2012
- Design for Manufacturing of Sculptured Surfaces: A Computational PlatformJournal of Computing and Information Science in Engineering, 2009
- NURBS representation of estimated surfaces resulting from machining errorsInternational Journal of Computer Integrated Manufacturing, 2009
- Heli4: A Parallel Robot for Scara Motions with a Very Compact Traveling Plate and a Symmetrical Design2006
- Design optimization and remote manipulation of a tripodInternational Journal of Computer Integrated Manufacturing, 2005
- Integrated Inspection and Machining for Maximum Conformance to Design TolerancesCIRP Annals, 2004
- Some New Parallel Mechanisms Containing the Planar Four-Bar ParallelogramThe International Journal of Robotics Research, 2003
- Singularities of parallel manipulators: a geometric treatmentIEEE Transactions on Robotics and Automation, 2003
- Optimization of a three DOF translational platform for well-conditioned workspace2002