ITO‐coatings by reactive low‐voltage ion plating: film properties and plasma analysis
Authors:
- 1 June 2009
- journal article
- vip r-and-d
- Published by Wiley in Vakuum in Forschung und Praxis
- Vol. 21 (3) , 29-34
Abstract
Transparent conductive oxides (TCO) are widely used materials for multifarious applications. According to today's state of knowledge, indium‐tin‐oxide (ITO) still offers the best electrical properties among numerous TCOs. However, ITO films produced by ion plating have only rarely been reported to be investigated. For most coating processes, ITO films need to be deposited under high temperature conditions (some 100 °C substrate heating) or require post‐deposition heat treatment in order to obtain high film quality. In this study, reactive low‐voltage ion plating (RLVIP) was used, which allows ‐ due to plasma assistance during the coating process ‐ deposition of ITO films at temperatures below 100 °C. Essential film properties, i.e. resistivity and optical transmission, were optimised by variation of arc current, gas pressure and deposition rate. These quantities ‐ particularly arc current and gas pressure ‐ have huge influence on the characteristics of the supporting plasma. This was shown by analysing the plasma with a mass‐spectrometric plasma monitoring system and with a Langmuir probe. In comparison with formerly studied coating materials (Ta2O5,Nb2O5,HfO2), different plasma compositions regarding the presence of metal oxide ions were determined, which could be attributed to elemental and molecular energy properties (ionisation and binding energies).Keywords
This publication has 16 references indexed in Scilit:
- Overview about the optical properties and mechanical stress of different dielectric thin films produced by reactive-low-voltage-ion-platingThin Solid Films, 2008
- Laterally resolved ion-distribution functions at the substrate position during magnetron sputtering of indium-tin oxide filmsJournal of Vacuum Science & Technology A, 2007
- Structural, electrical and optical properties of indium–tin–oxide thin films prepared by pulsed laser depositionThin Solid Films, 2007
- Deposited indium-tin-oxide (ITO) transparent conductive films by reactive low-voltage ion plating (RLVIP) techniqueJournal of Luminescence, 2007
- Optical and Structural Characteristics of Ion-Plated Nb2O5 and HfO2 FilmsPlasma Processes and Polymers, 2007
- The effect of annealing on structural, electrical and optical properties of nanostructured ITO films prepared by e-beam evaporationMaterials Research Bulletin, 2007
- Deposition of indium tin oxide thin films by cathodic arc ion platingThin Solid Films, 2005
- Indium-tin-oxide thin film deposited by a dual ion beam assisted e-beam evaporation systemNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2001
- Electrical and optical properties of electron beam evaporated ITO thin filmsSurface and Coatings Technology, 2000
- Formation of transparent heat mirrors by ion plating onto ambient temperature substratesThin Solid Films, 1979