Developing a Physical Model of the Human Cochlea Using Microfabrication Methods

Authors:
  • CSCharles R. Steele
    Charles R. Steele
  • SPSunil Puria
    Sunil Puria

Abstract
Advances in micromachining technology have provided the opportunity to explore possibilities of creating life-sized physical models of the cochlea. The physical model of the cochlea consists of two fluid-filled channels separated by an elastic partition. The partition is micromachined from silicon and uses a 36-mm linearly tapered polyimide plate with a width of 100 µm at the basal end and 500 µm at the apex to represent the basilar membrane. Thicknesses from 1 to 5 µm have been fabricated. Discrete aluminum fibers (1.5 µm in width) are machined to create direction-dependent properties. A 0.5 × 0.5 mm opening represents the helicotrema. The fluid channels are machined from plexiglas using conventional machining methods. A magnet-coil system excites the fluid channel. Measurements on a model with thickness 4.75 µm show a velocity gain of 4 and phase of 3.5 π radians at a location 23 mm from the base. Mathematical modeling using a 3-D formulation confirm the general characteristics of the measured response.

This publication has 15 references indexed in Scilit: