A Fast Charge/Discharge and Wide-Temperature Battery with a Germanium Oxide Layer on a Ti3C2 MXene Matrix as Anode
- 20 February 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (3) , 3678-3686
Abstract
A rapid charge/discharge secondary battery is critical in portable electronic devices and electric vehicles. Germanium, due to the metallic property and facile alloying reaction with lithium, displays great potential in fast charge/discharge batteries in contrast to other intercalation batteries. In order to accommodate the over 300% volume change, a 2D hybrid composite electrode consisting of a homogeneous, amorphous GeOx(x=1.57) layer bonded on Ti3C2 MXenes was successfully developed via an industry available method. The expanded inter-layer space inside MXene matrix accommodates the restricted isotropic expansion from the stress-released, ultra-thin GeOx layer. Owing to the improved e-/Li+ conductivity from both metallic reduced Ge and MXene, the battery showed an excellent charge/discharge performance as fast as 3 minutes (20.0 C). A high capacity retention of ~1048.1 mAh/g along with a Coulombic efficiency (CE) of 99.8% at 0.5 C after 500 cycles was achieved. Under 1.0 C, the capacity was still up to 929.6 mAh/g with a CE of 99.6% (<0.02% capacity decay per cycle) after ultra-long 1000 cycles. An almost doubled capacity of 671.6 mAh/g compared to graphite (372 mAh/g at 0.1 C) under 5.0 C and a capacity of 300.5 mAh/g under 10.0 C after 1000 cycles were respectively received. Under cold conditions, due to the low interface energy barrier, an efficient alloying reaction happens which prevents the Li plating on the electrode surface. High capacities of 631.6, 333.9 and 841.7 mAh/g under -20, -40 and 60 ℃ after 100 cycles demonstrate a wide-temperature tolerance of the battery. In addition, full-cell battery paired with LiNi0.8Mn0.1Co0.1O2 (NMC811) displayed a high capacity of 536.8 mAh/g after 200 cycles. A high capacity retention of full pouch cell after 50 cycles was also obtained. The super-high rate capability along with long cycling, wide temperature, scalable production and relatively low cost of this hybrid composite display promising potential in specific energy storage applications.Keywords
Funding Information
- University of Wisconsin-Milwaukee
This publication has 35 references indexed in Scilit:
- GeO2 Encapsulated Ge Nanostructure with Enhanced Lithium‐Storage PropertiesAdvanced Functional Materials, 2019
- High capacity binder-free nanocrystalline GeO2 inverse opal anodes for Li-ion batteries with long cycle life and stable cell voltageNano Energy, 2018
- Unique Structural Design and Strategies for Germanium‐Based Anode Materials Toward Enhanced Lithium StorageAdvanced Energy Materials, 2017
- Germanium‐Based Nanomaterials for Rechargeable BatteriesAngewandte Chemie International Edition, 2016
- A high tap density secondary silicon particle anode fabricated by scalable mechanical pressing for lithium-ion batteriesEnergy & Environmental Science, 2015
- Honeycomb-like Macro-Germanium as High-Capacity Anodes for Lithium-Ion Batteries with Good Cycling and Rate PerformanceChemistry of Materials, 2015
- Self‐Assembled Germanium/Carbon Nanostructures as High‐Power Anode Material for the Lithium‐Ion BatteryAngewandte Chemie International Edition, 2012
- Carbon−Silicon Core−Shell Nanowires as High Capacity Electrode for Lithium Ion BatteriesNano Letters, 2009
- Building better batteriesNature, 2008
- Issues and challenges facing rechargeable lithium batteriesNature, 2001