Impact Test and Bioactivity Properties of Polycaprolactone (PCL) by Addition of Nano-Montmorillonite (MMT) and Hydroxyapatite (HA)
- 8 November 2013
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 446-447, 1129-1133
Abstract
This report described the Impact Test result and Bioactivity Properties of biodegradable Polycaprolactone (PCL) blend with nano- Montmorillonite (MMT) and Hydroxyapatite (HA). The amount of nano-MMT is varies from 2 to 4 by weight % meanwhile the amount of HA is fixed to 10 by weight percentage (wt%). The addition of nano-MMT and HA filler is to tune and indirectly improve the mechanical and bioactive properties of PCL. The samples for these test are injected from injection molding machine. The Impact test are conducted using Charpy Method. From the analysis it is found that the toughness of PCL are decreased by the addition of these fillers. PCL/MMT composites gives a better result compare to PCL/MMT/HA composites. This is due to the HA characteristic which is brilttle and tends to reduce the ductile properties of the polymer. From the Simulated Body Fluis (SBF) result, formation of apatite layer at the surface of the composites is evidence of excellent bioactivity properties of HA. The enhance of bioactivity has been proved while incorporation of HA into PCL/MMT composite. SEM-EDX image showed the bulk formation of apatite layers on the composite surface with 10 wt% HA after 3 days immersed in SBF solution.Keywords
This publication has 14 references indexed in Scilit:
- Morphology and properties of nanocomposites based on HDPE/HDPE-g-MA blendsPolymer, 2010
- Nanosurfaces and Nanostructures for Artificial Orthopedic ImplantsNanomedicine, 2007
- Fracture mechanisms and fracture toughness in semicrystalline polymer nanocompositesEngineering Fracture Mechanics, 2007
- Biobased epoxy/clay nanocomposites as a new matrix for CFRPComposites Part A: Applied Science and Manufacturing, 2006
- In vitro studies of plasma-sprayed hydroxyapatite/Ti-6Al-4V composite coatings in simulated body fluid (SBF)Biomaterials, 2003
- Short fiber reinforced composites for fused deposition modelingMaterials Science and Engineering: A, 2001
- Apatite formation on surfaces of ceramics, metals and polymers in body environmentActa Materialia, 1998
- The intracellular degradation of poly(ε‐caprolactone)Journal of Biomedical Materials Research, 1985
- Aliphatic polyesters. I. The degradation of poly(ϵ‐caprolactone) in vivoJournal of Applied Polymer Science, 1981
- Hydroxyapatite reinforced polyethylene — a mechanically compatible implant material for bone replacementBiomaterials, 1981