Impingement of circular turbulent jets on rough boundaries
Authors:
- 1 November 2005
- journal article
- research article
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 43 (6) , 689-695
Abstract
This paper presents the results of a laboratory study of the perpendicular impingement of circular turbulent jets on rough walls placed at large impingement distances. The jet of air, with velocity U 0 of 45-90 m/s and diameter d at the nozzle of either 6.4 or 12.7 mm, impinged on a wall with a roughness k s of 1.73, 8.23, or 15.18 mm. Measurements were taken of the boundary shear stresses created by the jet, as well as velocity profiles in the wall jet region. The maximum shear stress on the wall, expressed in the dimensionless parameter {τ0m(H/d)2/ρU 2 0, dépends on the relative roughness k s/H and is about 2.5-5 times as large as the value for smooth walls. The boundary shear stress increases to a maximum τ0m at a radial distance from the jet centerline r of about 0.12 H, where H is the height of the jet above the boundary, and decreases as r increases further. This is shifted slightly toward the jet centerline as compared to the jet impinging on a smooth wall. In the wall jet region, the boundary shear stress varies as 1 /r 2. The velocity distribution in the wall jet region was found to be similar.Keywords
This publication has 5 references indexed in Scilit:
- A CALIBRATION CHART FOR THE PRESTON TUBEJournal of Hydraulic Research, 1980
- FLOW FIELD AND SCOURING EFFECTS OF STEADY AND PULSATING JETS IMPINGING ON A MOVABLE BEDJournal of Hydraulic Research, 1979
- IMPINGEMENT OF AXISYMMETRIC DEVELOPING JETSJournal of Hydraulic Research, 1977
- Impinging Circular Turbulent JetsJournal of the Hydraulics Division, 1974
- Investigation of a Turbulent Radial Wall JetJournal of Applied Mechanics, 1967